Examples of using Front guide in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Carefully move front guide rail(D) Fig.
Auto-Cutter with Emergency tear bar on the front guide.
Loosely assemble front guide rail(A) Fig.
Use a front guide hose or properly support exposed cable.
Pull the latch, releasing front guide.
Sliding way for front guide and side guide. .
Wide beam light distribution for washlighting from the front Guide.
Tighten the front guide rail mounting hardware.
Leveling and adjusting the front guide rail.
Flexible front guide fixing, with no body paper speeding up;
The machine has accurate front guide and side guide. .
Push the Front Guide to the subfloor and the Foot to the flooring.
Positioning part: the front guide, the side guide. .
The shelves can be inclined between the two guides, making sure that the smallest pins are properly inserted in theupper guide seat and the front part of the shelf is resting on the front guide.
Check that the front guide is rotated to the forward position.
Loosen both Knobs until the Foot and Front Guide move freely.
Check that the front guide is properly aligned with the center of the diamond blade.
Adopt the new perspective elasticity front guide positioning.
Fig. 19 illustrates the front guide rail loosely attached to the table saw.
When being still unable to remove the locked-up nails,remove further two screws securing the front guide with the hex wrench to clear jam.
Fasten down the front guide fastening screws.
On the basisof distances A and B in figure 5, trace the two fixing points of the front guide bracket at the centre of the door.
Once the tab is in the front guide, push the filter forward to snap it into place.
Hydraulic cylinders with adjustable front guide to fix tilting template.
When approaching a wall, raise the front guide and use the triangle guide at the back of the blade block to cut the last few feet.
Push the saw forward to cut keeping the front guide wheel in the cut line.
Without releasing the lever,slide the front guide backward or forward to align it with the mark for the desired paper size.
To remove the metal grease filter, use handle A to release the front guide, then angle the filter slightly downwards and release the back guide. .
The Biesemeyer T-square Commercial Fence System includes the fence assembly, front rail,rear rail, front guide tube, extension table, legs and a storage drawer along with the mounting hardware for assembling the fence system to your table saw.