Examples of using Function switches in English and their translations into Spanish
{-}
-
Colloquial
-
Official
The function switches as shown below.
The hair dryer is fitted with two function switches.
The function switches between[BEAT SLICE REMIX] and.
The hair dryer is fi tted with two function switches.
The function switches as follows each time the button is pressed.
In a case of overheating, the heat protection function switches the appliance off.
The function switches on the following light, depending on the equipment fitted.
After use, make sure to set all switches to 0 and to switch off the function switches.
The Direct Up/Down Function switches in the video mode are[][].
If the function switches to on, the(BLUETOOTH) indicator flashes twice in white.
When[USB/iPod 1/3] is pressed when the function is anything other than USB, the function switches to“USB”, and the fi les stored on the USB memory device are played back. vpage 23“Auto source selector function”.
This function switches the LEICA M8.2 off automatically after a pre-set time.
Afterwards, the function switches to automatic in the selected cooking mode.
Set the function switches(h), zoom(c) and focus(b)(see 5.3) and adjust the iris level via d.
Camera setting function switches Use them by referring to each operation item.
A Function switches Use these switches to set the unit functions. .
At an inflection point, a function switches from being a convex function to being a concave function or vice versa.
The function switches between[BEAT SLICE REMIX] and[SIDECHAIN REMIX] each time the[REMIX] button is pressed.
Use function switches(A- H) on the rear panel to select the disk unit's functions in accordance with the host computer and software you are using.
Use the function switches A to P on the rear panel of the unit to set the unit's functions and SCSI ID according to the host computer and software that you are using.
Set the function switch to the highest VDC position.
Set the Function switch to the 800A, 400A, or 40A range.
Set the function switch to the highest V DC position. 2.
With password storage unit, function switch against passwords, safety and reliability.
Set the function switch to the 1.5V or 9V BAT switch position.
Testing the batteries:- Place the function switch in the”test” position.
Set the function switch to the highest V DC position.
Turn the function switch to the A or V position. 2.
Set the function switch to the desired MΩ test voltage position.
Set the function switch to“Upper heat/hot air/rotisserie” and close the door.