Examples of using
Insertion length
in English and their translations into Spanish
{-}
Colloquial
Official
Insertion length from 20mm to 2 meter.
Longitud de inserciónde 20 mm a 2 metros.
Highly accurate even with short insertion lengths.
Muy preciso incluso con longitudes de inserción cortos.
Insertion length adjustable from 60 to 300 mm.
Longitud de inserción ajustable de 60 a 300 mm.
Highly accurate even with short insertion lengths.
Alta precisión incluso con longitudes de inserción cortas.
Various insertion lengths and connection threads.
Diversas longitudes de montaje y roscas de conexión.
Various mechanical adaptations and insertion lengths.
Distintas adaptaciones mecánicas y longitudes de montaje.
What should be the insertion length for thermowells in pipes?
¿Cuál es la longitud de inserción máxima de una vaina?
Various connection threads and insertion lengths.
Distintas roscas de conexión y longitudes de montaje.
Insertion length for swing 2400 mm Spindle speed 1900 rpm.
Longitud de inserción para swing 2400 mm velocidad del husillo 1900 rpm.
Highly accurate even with short insertion lengths.
Muy preciso, incluso con longitudes de introducción muy cortas.
The insertion length of the LLE FLEX must be at least 4 mm.
La longitud de introducciónde LLE FLEX tiene que ser de al menos 4 metros.
What is the minimum insertion length of a thermowell?
¿Cuál es la longitud de inserción máxima de una vaina?
INSERTION LENGTH- SELECTABLE- Specify per cm(0.39") increment.
LONGITUD DE INSERCIÓN SELECCIONABLE especificada en incrementos de 1 cm.
Note: Observe the minimum insertion length of the steerer in the stem. 4,54€.
Nota: Observe la longitud de inserción mínima de la dirección en el vástago.
The insertion length of the probe is 150mm(Ø4mm) and incorporates a reduced diameter tip for faster response.
La longitud de inserciónde la sonda es de 150mm(Ø4mm) e incorpora una punta de diámetro reducido para una respuesta más rápida.
Various mechanical adaptations and insertion lengths, also available with thermowell.
Distintas adaptaciones mecánicas y longitudes de montaje, también con tubo de protección.
The insertion length of the sensor should be long enough to minimize the error due to thermal dissipation called error of immersion.
La longitud de inserción del sensor debe ser suficiente para minimizar el error debido a la disipación térmica denominado error de inmersión.
The resonant frequency can be avoided by adjusting the insertion length or the dimensions of the sensor.
La frecuencia de resonancia puede evitarse ajustando lalongitud de la inserción o el tamaño del sensor.
Tools with an insertion length of 152 mm(6") to the shoulder can be used.
Pueden emplearse útiles con una longitud de inserciónde 152 mm(6") hasta el collar.
To do so, adjust the sealing cone of the oil temperature sensor to the insertion length of the dipstick.
Ajustar para ello la junta cónica del sensor de temperatura del aceite a la longitud de inserciónde la varilla indicadora del nivel de aceite.
What should be the insertion length for thermowells in pipes? All FAQ.
¿Cuál es la longitud de inserción máxima de una vaina? Todas las FAQ.
Various insertion lengths are available as standard(and custom), as well as overall length(probe plus fiber) ranging from 1.5m to 4.0m standard lengths..
Hay disponibles varias longitudes de inserción como estándar(y personalizadas), así como para la longitud total(sonda más fibra), que incluyen longitudes estándar de 1,5 m a 4,0 m.
The wide range of materials, O-rings,process connections and insertion lengths makes it one of the most versatile housings in the METTLER TOLEDO portfolio.
La amplia gama de materiales,juntas tóricas, conexiones de proceso y longitudes de inserción hacen de esta carcasa una de las más versátiles de METTLER TOLEDO.
For short insertion lengths(copper alloy) solid-machined version optionally.
En longitudes de montaje cortas(aleación de cobre) versión de una sola pieza opcional.
Tools with an insertion length of 152 mm(6") are suitable.
Son adecuados útiles con una longitud de inserciónde 152 mm(6") medida hasta el collar.
For 3/8″ OD tubing the insertion length should be approximately 3/4 of an inch.
Para tubos OD de 3/8″ ellargo de la inserción debería ser aproximadamente 3/4″.
Mark the tubing for length of insertion.
Marque el tubo para el largo de la inserción.
Results: 27,
Time: 0.0468
How to use "insertion length" in an English sentence
Element Insertion Length (mm) 203 mm.
The steerer insertion length is about 65mm.
Adjustable insertion length through standard 1/2″ NPT fitting.
Español
Dansk
Deutsch
Français
हिंदी
Italiano
Nederlands
Português
Русский
Tagalog
عربى
Български
বাংলা
Český
Ελληνικά
Suomi
עִברִית
Hrvatski
Magyar
Bahasa indonesia
日本語
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Norsk
Polski
Română
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Turkce
Українська
اردو
Tiếng việt
中文