Examples of using Machine run in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Let the machine run empty at 60° C.
High efficiency- more output during machine run.
Let the machine run for half an hour.
Gear box transmission system makes the machine run stable.
The machine run smooth, low noise.
People also translate
When the engine starts,let the machine run for a short time.
This machine run steadily and works reliably.
Outstanding Cooling way to ensure machine run smoothly.
Make the machine running at highest speed 3000RPM.
The safety outputs are in the machine run state(Follow Mode), or.
Machine runs but some things need to be repaired.
Never let the machine run unattended.
The machine running slowly with low noise and low dust.
It will also display machine run hours and error codes.
The machine runs very quietly and is fully functional.
Before cutting the first cut, let the machine run for a short while.
The machine run display by the digital display.
Fill the tank with the cleaning liquid and let the machine run for a while.
This machine run steadily and works reliably.
Fill the tank with 1/3 of the bottle of cleaning liquid and let the machine run for a while.
In order to have that machine running, you need lots and lots of people.
If you ever notice that the produce backs up into the feeding chute,loosen the juicing knob and let the machine run for a few seconds.
The rotations on the machine run after clicking on the"Spin".
Let the machine run at no load in a safe area after mounting the accessories. If the machine vibrates strongly, immediately switch off the machine, remove the mains plug from the mains, and try to solve the problem.
If the machine has not been sufficiently warmed up for operation,make the machine run idle for approximately three minutes. Moderate intermittent operation.
Let the machine run at no load in a safe area after mounting the saw blade.
The optimisation and control of each aspect of the work process are carried out through the application of densitometers, point meters andtop of the range spectrophotometers in the pre-printing phase as well as the machine run.
Export of machine run conditions to USB memory stick.
Inspection: The machine running normally, and the pressure is dropping when spraying.