Examples of using Minimum diameter in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Minimum diameter of the bottle: 22 mm.
Inside turning circle minimum diameter of uncut area.
Minimum diameter for a standpipe drain.
Create a service loop(minimum diameter of 2 ft[61 cm]) with.
Minimum diameter of sample 3mm Test save.
Interface is suitable for minimum diameter equal to or greater than 15mm;
Minimum diameter roll of about 450-500 mm.
The standpipe drain requires a minimum diameter standpipe of 2" 5 cm.
Minimum diameter of the hole for vent pipe.
Inside turning circle minimum diameter of uncut grass- left side.
Minimum diameter in mm of the air regulation possible: 6.
The made-to-measure designs seek maximum flexibility and minimum diameter.
Cooking zone Minimum diameter Maximum recommended diameter. .
Standpipe drain system- wall or floor(views A& B)The standpipe drain requires a minimum diameter standpipe of 50 mm 2.
Minimum diameter in mms of the air regulation possible: 1.
If the cord is extended, use an earthed extension cord with a minimum diameter of 3 x 1 mm copper wire core.
B any point of minimum diameter Dmin of bend calculated by the following formula.
Diamut milling cutters are available in a range of versions, from a minimum diameter of 6 mm to a maximum of 20 mm.
It must have a minimum diameter of 30 centimeters and not very deep, with edges of 7 or 12 centimeters, according to its diameter. .
It must be protected with a permanent non-closable grill orother suitable protection provided that the minimum diameter is not reduced.
In either case, the bolts must have a minimum diameter of 5/16"(8 mm) and penetrate at least 1-1/2"(40 mm) in the solid background.
Hollowing your stainless steel parts allows you to make them lighter, and reduce the price of printing butit is necessary to respect a minimum diameter.
The drift mandrel should have a minimum diameter equal to the specified bore of the drill collar(standard or optional) minus 1/8 inch.
Use a fibre-reinforced water hose(not included)with a standard coupling. Minimum diameter 1/2 inch(13 mm),minimum length 7.5 m.
The minimum particle size, which dictates the minimum diameter of the particles or particulate matter that the baghouse is capable of filtering, is measured in micrometers.
Entry hole to masonry chimney must be lined with an 8 inch(20mm) minimum diameter clay liner, or equiva-lent, secured with refractory mortar.
Standpipe Diameter/Capacity- Needs a 1¼” minimum diameter standpipe with a minimum carry-away capacity of 7 gallons per minute.
Commercial volumes State the commercial volume(indicating the criteria andformula used and the minimum diameter considered for the calculation) by commercial type including the total commercial volume.
To respond more exactly to the needs of watchmakers, the minimum diameter of bars which can be machined on the MultiSwiss will also change from 4 to 3 mm.
