Examples of using Network parameters in English and their translations into Spanish
{-}
-
Colloquial
-
Official
ATYS t, g, p:auto-configuration of the network parameters.
Configuring Network Parameters on the Control Panel.
Select this setting when you set the network parameters manually.
Return network parameters to their secure default values.
These settings are used to enter the network parameters for the system.
Set the network parameters for Internet connection if required» page 170.
Tap Next to let the phone retrieve the network parameters automatically.
Tune the network parameters(the weights and biases) to optimize performance.
Please input the data according to local network parameters.
Configure the printer's network parameters as appropriate for your PC and your network environment.
See(2) Reports on the configuration of the device network parameters.
Network parameters Defines the network parameters required to access the camera over the internet.
Manually configure IP Select to set network parameters manually.
If you want to edit the network parameters select the Ethernet settings option and edit the parameters you need.
Configure IP automatically Select to set network parameters automatically.
To load network parameters into the RF repeater, it is necessary to link the RF gateway and the RF repeater in a configuration operation.
The latter option is available only if you have made changes to any of the network parameters.
It can configure the transmission of the network parameters(DTS mode) and monitor its state.
Hold down the RESET button for 3s to reset the settings if you change the network parameters.
Make sure that the static IP network parameters are compatible with your local network and the existing IP range in the installation.
Uses a DHCP server to automatically obtain the unit's network parameters such as IP address.
When Embedded Web Server RX is used, network parameters and security settings can be conveniently changed and checked from your PC.
To work in a mesh network, the RF remote indicator has to be configured with its network parameters.
An integrated web server allows remote access to network parameters such as IP address, subnet masks, and gateways.
You only need to configure the network settings if your router does not support DHCP orif you want to configure the network parameters manually p.34.
You can also edit the network parameters of another environment for the camera shown see Section 4.8“Configuring Different Network Environments“.
However, it will be useful to open the Web application for the first time and configure the network parameters according to your needs.
The configuration menu allows you to set network parameters, date and time, the audio output mode(mono/stereo) and view relevant device information.
General configuration; unit name, network parameters, recording and recovery of projects(overall equipment configuration), start mode, firmware updates, default parameter reset, connection status.
If you want to configure the network parameters manually, check that you are using an IP address which is not used by other network devices in your network. .
