Examples of using Nominal current in English and their translations into Spanish
{-}
-
Colloquial
-
Official
XXX Nominal current of the drive in Amperes.
Allowed overload to 600% of the nominal current.
Nominal current Max. transient current 4.
For example if XXX is 8A8, nominal current is 8.8 A.
The nominal current is showed on the table below.
AOH corresponds to twice the drive nominal current.
Therefore the nominal current and the plate current are the same.
Direct starting motors:demand 6 times nominal current.
More Less Note Nominal current dependent on heat/humidity loading on HVAC unit.
The fuse must take the charge controller nominal current.
With nominal current assistant and electronic locking of the set nominal currents. .
The value is referred to as a percentage of the nominal current.
They must be designed for the nominal voltage, the nominal current and an operating temperature range of 0 C to 52 C.
Fan Specifications 4020 Size: 40x40x20mm 5 blades Connector:pH Nominal current:….
The fuses are sized according to the nominal current of the field supply device.
Fan Specifications 4010 Size: 40x40x10mm 7 blades Connector:pH Nominal current:….
Magnetic setting(Ii): between 4 and6 times the nominal current.- Switch with electronic relay.& 136;
The metering is adjusted in such a way that the motor of the press always runs with the fixed nominal current.
The maximum current rating should be 1.5 times the nominal current of the charge controller.
The nominal current is adjusted by cutting out resistors(R1 R21) from the board according to the current coding table.
This welder is dimensioned to supply a 12 max nominal current in complete safety for a period of work of 20% of the total usage time.
In the tables, the switches are arranged according to their thermal nominal current Ith.
Maximum nominal current for the used cable and maximum protection of the equipment fuse, limit the nominal current of the circuit breaker of grid.
Dynamic power reserve with 150% of the nominal current for 5 seconds.
Instrument transformers for protection purposes supply protection relays andmust also function accurately at a multiple of the nominal current.
Model Nominal tension(Volts)Nominal frequency(Hertz) Nominal current(Amperes) Consumption.
The metering is managed in such a way that the press motor runs with the prescribed nominal current.
For the example above, setting a current limit of three times the nominal current may be desirable.
Note: Correct motor run requires that the magnetizing current of the motor does not exceed 90 percent of the nominal current of the inverter.