Examples of using Sheet surface in English and their translations into Spanish
{-}
-
Colloquial
-
Official
No scratches on the sheet surface.
Sheet surface is protected with High quality PVC.
Application-SUPER GALUM and galvanized sheet surface etc.
When the sheet surface have grease, wet paint, rubber track.
Or the wax to clean the acrylic sheet surface.
Easily specify any page or sheet surface to print in black and white.
Aluminum Beauty Case with Silver Aluminum Sheet Surface,….
Smoothing and leveling of the sheet surface at the Smoothing press;
Therefore it will have residual cold mill oils on the sheet surface.
The sheet surface should be smooth without pits or slag inclusions.
Toughened safety glass(ESG),s= 4 mm, steel sheet Surface.
Operators can easily specify any page or sheet surface to print in black and white during the makeready stage.
Alkaline solution can not be used,it will erode the sheet surface.
It also supports media with different profiles per sheet surface, specifying the correct profiles for front and back.
Regardless of the grammage, the suction is dispersed evenly over the whole sheet surface.
Resistivity of the electric corrugated plastic sheet: surface impedance between 103~105.
In addition, the consistent high-profile texture ensures optimum interface friction characteristics at any point on the sheet surface.
Tubes plugged with corks whilst tube sheet surface is restored.
Easily specify any page or sheet surface to print in black and white and save on click charges while honoring the designer's intent for the printed piece.
Resistivity of the antistatic corrugated plastic sheet: surface impedance between 106~1011.
Easily specify any page or sheet surface to print in black and white and save on click charges while honoring the designer's intent for the printed piece.
With the helpof a kitchen brush, paint the sheet surface with melted butter.
Polystone P CubX consists internally of a homogeneous, rectangular(orthogonal)grid pattern, welded to two sheets on its outsides, which form the sheet surface.
Place the sander on the workpiece so that all of the sanding sheet surface is in contact with the workpiece.
The propagation direction of the light entering the sheet is changed by scattering in such a manner that the total reflection on the surface is reduced andthe light exits at small angles to the sheet surface Figure 2.
PVC panel and sheets surface, vivid designed.
Thin Wall Sheet Metal Surface.
Welded Mesh Sheet without surface treatment.