Examples of using Speaker terminal in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Hold the clamp of the speaker terminal.
Rotate the speaker terminal clockwise to tighten.
Attach the end without the name tag to the speaker terminal.
Remove the speaker terminal cover by.
Don't connect more than one cable to each speaker terminal.
People also translate
The speaker terminal will accept a 12-24 AWG wire.
Input RCA(phono) socket Connectors Output Speaker terminal board.
Switching the speaker terminal If you selected Surr.
Stripped speaker cord is touching another speaker terminal.
Rotate the speaker terminal counterclockwise to loosen it.
Rotate the speaker terminal counterclockwise to loosen it.
Connect the speaker cord to the speaker terminal of the leg.
Enlarge Spring-loaded speaker terminal Practical round design.
Do not connect more than one speaker cable to one speaker terminal.
The speaker terminal caps cannot be fully removed from the base.
Insert the speaker cable's core wire to all the way into the speaker terminal.
Remove the speaker terminal cover by gently pulling it toward you.
Insert the speaker cord into the speaker terminal inside the leg.
The speaker terminal caps cannot be fully removed from the base.
Using a Banana Plug 1 Remove the speaker terminal cover by gently pulling it toward you.
To the speaker terminal of the leg The cord with the black stripe is on this side, facing up.
Strip the speaker wires 1/2” and insert into the speaker terminal and tighten the setscrew to secure into place.
Turn the speaker terminal knob to the left until the hole() is visible.
Re-twist the core of the speaker cable, andconnect it so that it does not protrude from the speaker terminal.
Fully tighten the speaker terminal knob, and then insert the end of the plug cable into the top of the knob.
Joining the leg andthe speaker unit 6 Insert the speaker cord into the speaker terminal inside the leg.
Do not connect more than one wire to each speaker terminal; do not connect one speaker to several terminals. .
