Examples of using Threaded stud in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Place hex nut onto the threaded stud.
The threaded stud kit sold separately.
Stand and boom have a 3/8" threaded stud.
Threaded stud for fastenings on coated steel.
Place filter nut onto threaded stud and.
Threaded stud/ stainless steel/ butt weld.
Mounting with ring clips,clamps or threaded stud.
Position the threaded stud in the predrilled hole and.
From under the sink,place the semi-circularmounting plate onto the threaded stud.
Position the threaded stud in the drilled hole and then.
From under the sink, place the semi-circular mounting plate andhex nut onto the threaded stud.
M8 threaded stud(with 8 mm plastic washer) Share.
Place the filter nut onto the threaded stud and tighten down.
Threaded stud(stainless steel) for multipurpose fastenings.
Models requiring threaded stud to mount line head RH2.
Threaded stud/ steel/ for manual pre-assembly FI-FK.
Pull rack guide to the side of the threaded stud and remove from the front.
Threaded stud for multi-purpose fastenings on steel in highly corrosive environments.
Install locknut(K) andcable guide(F) on threaded stud and tighten securely.
The central threaded stud can be modified to suit the gap.
Threaded stud for electrical connectors on steel in highly corrosive environments.
Line up hole in filter plate with threaded stud and slide it down until the filter stops against the plate.
Threaded stud for grating and multi-purpose fastenings on steel in mildly corrosive environments.
There is a 1/2" threaded stud for mounting compatible microphones.
Select threaded stud listed on fit-up chart for your model trimmer.
If the threaded stud is not driven in to the correct position, adjust the driving power to an appropriate setting by turning the power regulation wheel.
Upper threaded stud in STAINLESS STEEL for long life, and possibly also replaceable.