Examples of using Three knobs in English and their translations into Spanish
{-}
-
Colloquial
-
Official
On the right hand side there are three knobs.
There are three knobs that control the EQ.
Besides just the rocker,it has three knobs.
There are three knobs, bottom, attack, and level.
Insert new reel with the three knobs downwards.
There are three knobs, level, drive, and tone.
Editing this pedal is pretty simple,there are only three knobs.
There are three knobs to control the digital delay.
With a correct and conscious use of the three knobs it can make very well.
Three knobs with summer and winter(Selectable).
It is all controlled with three knobs for speed, depth and reverb.
The three knobs are very familiar, very simple configuration.
The width, length andpattern of the stitch is easily set by turning the three knobs.
It only has three knobs, input, tone, and output.
The MASTER area holds four freely assignable control elements three knobs and one button.
There are just three knobs for starting, control and direction.
The effect can be selected using the combo box and three knobs below allow altering the effect itself.
There are three knobs here to control the effect of digital delay.
Set to ON(>), the equalizer circuit is active and the three knobs r can be used to adjust their respective frequencies.
With the three knobs on the zone controller, it is possible to adjust the zones- A B C- individually.
UTILIZATION There are only three knobs, gain, volume, and tone, which are pretty self-explanatory.
Install three knobs(M) onto the valve stems on firebox and hood assembly(A) and one knob(M) onto the valve stem on left side burner table(H) and tighten them.
There are three knobs here to control the effect of digital delay.
Check that all three knobs are set to the appropriate setting and the blue power indicator light is on. Check that outlet is working.
It doesn't get much easier than a three knob pedal.
There are three control knobs and 4 faucets.
Three smaller knobs allow the main parameters to be easily selected.
Go on to knobs three and four- Block X and Block Y.
In Single-FX Mode,the view will show one effect name with three parameter knobs.