Examples of using User button in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Assign a Function to the User Button 1.
Press the USER button to open the USER menu.
The User button provides easy access to your favourite function.
Assign a Function to the User Button 32.
People also translate
Press the User button to display the Sensitivity adjustment screen.
Click the Create new user button.
The purpose of the User button is to provide easy access to your favorite functions.
This function can also be allocated to a User button.
By default, pressing the User button will activate the Backlight.
The selected function will be assigned to the user button.
Press the User button to display the Threshold Level adjustment range screen.
The selected function will be assigned to the user button.
Backlight is the default function assigned to the User button; press to turn the backlight on and off.
Use this page to assign the function of the User button.
Examples include the three manual rings and user button but also the interfaces such as 3G-SDI/ HDMI and XLR input.
That function will then be activated each time the User button is pressed.
Press and hold the User button to display a list of functions that can be assigned to the button. .
That function will be activated each time the User button is pressed.
Assign a Function to the User Button Highlight the function you would like to assign to the User button and press Select.
There is a wide choice of functions that can be assigned to the User button.
Backlight is the default function assigned to the User button; press to toggle the backlight on and off.
Select More to display a list of additional functions to assign to the User button.
Once the Pinpoint Type function is assigned to the User button it will also control the Pinpoint settings in the Modes menu.
The infrared blocking filter can be switched on and off via the User button.
There are nine different functions that can be assigned to the User button, and once a function has been assigned, it will be activated each time the button is pressed.
ʯ Press to activate your selected function ʯ Press and hold to assign a function to the user button.
If the backlight is not controlled by the User Button, it will automatically activate on pressing a button as determined by backlight settings in the Options menu page 49.
The Threshold can then be increased or decreased using the left and right Arrow buttons.(page 25)Ground Balance Mode Press the User button to display the Ground Balance Mode selection box.
It incorporates a system of wireless remote control, as a normal camera with the ARRI MVF-1 multi viewfinder attached, oryou could operate it with an on-board monitor and controlled via the user button interface on the camera body.