Examples of using When the processor in English and their translations into Spanish
{-}
-
Colloquial
-
Official
When the processor is handling the interrupts.
A red cross is shown when the processor is disconnected.
When the processor is positioned correctly, it fits easily into.
Why should I wash with alkali and pickle when the processor is being maintained?
Compile time: When the processor makes all the difference- iQ UK.
A scraper may be used but must be used only when the processor is not running.
Compile time: When the processor makes all the difference.
Idle States(C-states) are used to save power when the processor is idle.
When the processor is overloaded, everything stands still immediately.
Identify processes that are running when the processor time is at the highest.
When the processor is positioned correctly, it engages easily into the socket.
They are either fanless, ortheir fans are almost noiseless, except when the processor is driven hard.
When the processor was obsolete, so was the device and thus, the programming.
When Keylock is enabled, the visual indicator will flash 6 times when the processor is turned on.
When the processor is positioned correctly, it drops down into the socket with minimal pressure.
An x86-64 processor acts identically as an IA-32 processor when running in real mode or protected mode,which are supported sub-modes when the processor is not in long mode.
When the processor is positioned correctly, press it gently to seat it in the socket.
A processor is not obligated to assign a spawned procedure elsewhere; if the machine only has two processors andthe second is still busy on fib(1) when the processor executing fib(2) gets to the procedure call, the first processor will suspend fib(2) and execute fib(0) itself, as it would if it were the only processor. .
When the processor is positioned correctly, it drops down into the socket with minimal pressure.
This usually occurs when the processor collapses for a moment because it requires more load than it can withstand.
When the processor's contact pin meets the headphones' contact point,the CHG indicator lights up.
This error happens when the processor did not respond properly to requests and interrupts are not being processed on time.
When the processor manufacturer considers that the version is stable, our firmware department now have to develop it.
Memory-processor transfer When the processor reads from the memory subsystem into a register or writes a register's value to memory, the amount of data transferred is often a word.
When the processor needs to read or write a location in memory, it first checks for a corresponding entry in the cache.
When the processor is put in STANDBY mode,the trigger signal is removed and the amplifiers automatically turn off.
When the processors and their interconnect are all implemented on a single chip,the technology is known as chip-level multiprocessing(CMP) and the single chip as a multi-core processor. .
Remove these headphones from the processor when using other headphones.
WaxStop filters must always be used when wearing the processor in Hybrid mode.
Place your hand beneath the processor when you are moving it to the system.