Examples of using Agglomerates in English and their translations into Tagalog
{-}
-
Ecclesiastic
-
Colloquial
-
Computer
The application of mechanical stress breaks the particle agglomerates apart.
Ultrasonic dispersing ensures that agglomerates are broken so that the nanoparticles are well dispersed.
The obvious tailing to the right,results from the material composition(agglomerates and larger primaries).
Dispersion: Sonication breaks up droplets, agglomerates and aggregates preparing a uniform dispersion in the dye.
For the characterization and measurement of primary particles,the particles should be well dispersed as agglomerates falsify the measurement results.
While the outer particles of such agglomerates are exposed to water, the inner particle surfaces remain dry.
Under normal conditions, graphene is hardly dispersable in water andforms aggregates and agglomerates when dispersed in aqueous medium.
While the agglomerates are reduces easily, it takes longer processing to grind down larger primary particles.
During these top-down processes aggregates and agglomerates are mechanically cut and then tied in liquids.
When adding pigment powder to waterborne, solventborne or epoxy systems,the individual pigment particles tend to form large agglomerates.
Ultrasonic cavitation generates high shear that breaks particle agglomerates into single dispersed particles.
Ultrasonication can separate particle agglomerates, clean particle surfaces and reduce the viscosity of shear thinning or thixotropic liquids.
It is decisive, that water, cement and admixtures are evenly dispersed anddistributed down to a fine scale and that agglomerates are sufficiently dispersed.
Hielscher ultrasonic homogenizers break powder agglomerates in liquids that conventional agitators and high shear mixers cannot break.
The agglomerates have to be broken, particles have to be detangled and/or dispersed, the surfaces have to be activated or functionalized, and nano-droplets must be emulsified.
The resulting currents andturbulences disrupt particle agglomerates and lead to violent collisions between individual particles.
High-shear mechanisms, such as rotor-stator mixers or agitator bead mills are conventionally being used to break such agglomerates and to grind down the individual pigment particles.
Ultrasound is a reliable tool to destroy agglomerates and to create conditions where the primary particles are hold in….
Traditional concrete mixing technologies, such as“on-road-mixing” or rotary mixers provide insufficient mixing action to disperse agglomerates of cement particles and other cementious materials, such as fly ash or silica.
Hielscher ultrasonic processors can break agglomerates, aggregates and primary particles of various materials, such as pigments, metal oxides, or crystals.
Sonication of the adsorbant in the solvent eliminates agglomerates within a few seconds and prepares a uniform, easily packed column.
The high hydraulic shear forces generated by ultrasonics break agglomerates, droplets and cell tissue into smaller fragments and produce a uniform fine-size product.
Ultrasonic deagglomeration anddispersing is a powerful method to break particle agglomerates and aggregates into individual particles and results in uniformly dispersed suspensions.