Examples of using
Carbon content
in English and their translations into Tagalog
{-}
Ecclesiastic
Colloquial
Computer
High carbon content, compressive strength and hardness.
Mataas na carbon nilalaman, compressive lakas at tigas.
Most types of steel have a relatively low carbon content of about 0.05% to 0.3%.
Ang pinaka-karaniwang carbon bakal marka magkaroon ng isang carbon nilalaman mula sa 0. 05% sa 0.
High carbon content, high compressive strength and high hardness.
Mataas na nilalaman ng carbon, mataas na lakas ng compressive at mataas na tigas.
The most common carbon steel grades have a carbon content ranging from 0.05% to 0.60%.
Ang pinaka-karaniwang carbon bakal marka magkaroon ng isang carbon nilalaman mula sa 0. 05% sa 0. 60%.
The characteristics of each carbon steel grade is mainly defined by the carbon content.
Ang mga katangian ng bawat carbon steel grade ay higit sa lahat tinukoy sa pamamagitan ng ang carbon nilalaman.
This higher amount of carbon content makes these molecules oilier(therefore referred to as‘fatty').
Ito mas mataas na halaga ng carbon nilalaman ay gumagawa ng mga molecule oilier( din tinutukoy bilang 'mataba').
By-product of garbage carbonization process"artificial carbon" fixed carbon content in high(about 90%).
By-produkto ng basura carbonization proseso" artipisyal carbon" nakapirming carbon nilalaman sa mataas( tungkol sa 90%).
The carbon content is held to 0.08% maximum, while the nickel content is increased slightly.
Ang carbon nilalaman ay gaganapin sa0. 08% Maximum, habang ang magtubog sa nikel nilalaman ay bahagyang tumaas.
Depending on the type of the furnace,atmosphere, and carbon content the reaction occurs according to the scheme.
Depende sa uri ng pugon,kapaligiran, at carbon nilalaman nangyari ang reaksyon ayon sa mga pamamaraan.
This depends on the carbon content of the fuel, and whether it is derived from biological sources(such as paper, wood or natural fibres).
Depende ito sa carbon content ng gasolina, at kung ito ay nagmula sa biological sources( tulad ng papel, kahoy o natural fibers).
Carbon fiber: It is a new fiber materialwith high strength and high modulus fiber, its carbon content is above 95%.
Carbon fiber ay isang bagong uri ng mga hibla materyal na may mataas na lakas at mataas na modulus, nakung saan ay may higit sa 95% carbon nilalaman.
L contains molybdenum andhas a low carbon content(less then 0.03%), and has even better corrosion resistance than 304 grade.
L ay naglalaman ng molibdenum atmay isang mababang nilalaman ng carbon( mas mababa kaysa0. 03%), At may mas mahusay na kaagnasan paglaban kaysa sa 304 grado.
Carbon fiber is a new type of fiber material with high strength and high modulus fibers with a carbon content of over 95%.
Carbon fiber ay isang bagong uri ng mga hibla materyal na may mataas na lakas at mataas na modulus, na kung saan ay may higit sa 95% carbon nilalaman.
To collect field samples for estimating the carbon content, a range of technical expertise and tools are required.
Upang mangolekta ng mga sample ng patlang para sa pagtantya ng nilalaman ng carbon, isang hanay ng mga teknikal na kadalubhasaan at mga tool ay kinakailangan.
Carbon fiber is a new type of fiber material with high strength andhigh modulus, which has more than 95% carbon content.
Carbon fiber ay isang bagong uri ng mga hibla materyal na may mataas na lakas at mataas na modulus, nakung saan ay may higit sa 95% carbon nilalaman.
Type 304L is an extra low-carbon variation of Type 304 with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding.
Uri 304L ng dagdag na mababa-carbon pagkakaiba-iba ng Uri ng 304 na may0. 03% Maximum carbon nilalaman na inaalis karbid precipitation dahil sa hinang.
The total carbon content should be theoretically 6.13 wt% carbon, which means that all carbon is chemically combined as WC.
Dapat na theoretically Ang kabuuang nilalaman ng carbon 6. 13 wt% carbon, na nangangahulugan na ang lahat ng carbon ay chemically pinagsama bilang WC.
Carbon fiber is a new type of fiber material with a high strength and high modulus fiber with a carbon content of more than 95%.
Carbon fiber ay isang bagong uri ng mga hibla materyal na may mataas na lakas at mataas na modulus, na kung saan ay may higit sa 95% carbon nilalaman.
The carbon content of a WC powder is commonly stated as total carbon and free carbon(uncombined carbon present as graphite or amorphous carbon)..
Ang carbon nilalaman ng isang WC pulbos ay karaniwang ipinahayag bilang kabuuang carbon at libreng carbon( carbon uncombined kasalukuyan bilang grapayt o walang hugis carbon)..
Carbon fiberCarbon fiber is a new type of fiber material with high-strength, high-modulus fiber with a carbon content of more than 95%.
Carbon fiber ay isang bagong uri ng mga hibla materyal na may mataas na lakas at mataas na modulus, na kung saan ay may higit sa 95% carbon nilalaman.
The carbon content of a unit of electricity has fallen to 277 grams per kWh, beating the strict pathway set out in the Climate Change Act's Carbon Budgets by up to four years.
Ang carbon content ng isang yunit ng kuryente ay bumagsak sa 277 gramo bawat kWh, na pinapalo ang mahigpit na landas na itinakda sa Climate Change Act's Carbon Badyet hanggang apat na taon.
Carbon compositesmaterial is mainly composed of a special fiber of carbon elements, its carbon content varies with the species, and generally more than 90%.
Carbon compositesmaterial ay pangunahing binubuo ng isang espesyal na fiber ng mga elemento ng carbon,ang kanyang carbon nilalaman ay nag-iiba sa mga uri ng hayop, at sa….
ASH/ CARBON/ SAND/ LIMESTONE The carbon content of the bed is typically around 2-3 percent(as coal being 5% of the total bed material) and the balance of the bed meterial can be ash, sulphated limestone or sand.
ABO/ KARBON/ BUHANGIN/ LIMESTONE Ang nilalamang karbon ng palaparan ay humigit-kumulang 2-3 porsyento( basta's ang coal ay 5% ng kabuuang material) at ang balance ng materyal ng palaparan ay maaaring maging abo, sulphated limestone at buhangin.
A team of Earth and Space Sciences Department ofthe University of Washington(Seattle) proposes to reassess sharply higher organic carbon content of the soil very high latitudes.
Ang isang koponan ng Earth at Space Sciences Department ng Unibersidad ng Washington( Seattle) ay nagmumungkahi namuling suriin nang masakit mas mataas na organic carbon nilalaman ng soils mataas na latitude.
For most engineering applications the maximum carbon content is 0.50%,carbon steel grades containing more carbon than this are usually used for tools.
Para sa karamihan ng mga aplikasyon ng engineering ang pinakamataas na nilalaman ng carbon ay 0. 50%,carbon asero grado na naglalaman ng higit carbon kaysa rito ay karaniwang ginagamit para sa mga tool.
At a March 2015 conferenceon Climate Smart Agriculture, Le Foll proposed the ambitious target of increasing French soil carbon contents by 0.4% year-on-year("4 pour mille").
Sa isang pagpupulong Marso 2015sa Climate Smart Agriculture, Ipinangako ni Le Foll ang mapaghangad na target ng pagtaas ng mga nilalaman ng carbon sa lupa ng Pranses sa pamamagitan ng 0. 04% taon-sa-taon(" 4 ibuhos mille").
The low carbon content of Type 304, and especially 304L, by reducing or eliminating carbide precipitation due to welding, makes these types of stainless suitable for a much wider range of corrosive service than Type 302.
Ang mababang carbon nilalaman ng Uri ng 304, at lalo 304L, sa pamamagitan ng pagbabawas o pag-aalis ng karbid precipitation dahil sa hinang, gumagawa ng ganitong mga uri ng hindi kinakalawang na angkop para sa isang mas mas malawak na hanay ng mga kinakaing unti-unti na serbisyo kaysa Uri ng 302.
Lithium hydroxide was the basis of the CO₂ absorbers that kept the astronauts on Apollo 13 alive,and potassium hydroxide captures CO₂ so efficiently that it can be used to measure the carbon content of a combusted substance.
Ang Lithium hydroxide ay ang batayanng CO₂ absorbers na pinananatili ang mga astronaut sa buhay ng Apollo 13, at potassium hydroxide ay nakukuha ang CO₂ kaya mahusay na maaari itong magamit upang sukatin ang carbon content ng isang sunugin na substansiya.
This device can be used in the coking section of the activated carbon production, due to the wide application of activated carbon, market demand is big, high profit, so a lot of customers are keen to produce activated carbon,activated carbon without carbonized parts of the production process of continuous carbonization furnace carbonized materials can make the carbon content is greatly increased.
Ang aparato na ito ay maaaring gamitin sa coking seksyon ng activate carbon produksyon, dahil sa ang malawak na application ng activate carbon, demand na merkado ay malaki, mataas na kita, kaya maraming mga customer ay masigasig upang makabuo ng activate carbon, activate carbon nawalang carbonized bahagi ng ang proseso ng produksyon ng tuluy-tuloy na carbonization pugon carbonised materyales ay maaaring gumawa ng mga nilalaman ng carbon ay lubhang nadagdagan.
Nielsen, on the other hand,chose Budweiser because of its lower carbon dioxide content.
Nielsen, sa kabilang dako, pinili Budweiser dahilsa kanyang mas mababang carbon dioxide nilalaman.
Tagalog
Español
عربى
Български
বাংলা
Český
Dansk
Deutsch
Ελληνικά
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Bahasa indonesia
Italiano
日本語
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Turkce
Українська
اردو
Tiếng việt
中文