Examples of using End surface in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Ferrule end surface pre-domed.
The horizontal distance between the plane of symmetry and bicycle inner end surface of each roller should be at least 175 mm.
Ferrule end surface pre-domed.
The material of guide vane arm is ZG230-450. End cover is installed at the guide vane arm, the bolt at the center of end cover is used for adjusting the height of guide vane and the thickness of padding ring, to ensure the proper clearance of guide vane upper, lower end surface.
Ferrule end surface pre-domed.
The delamination and crackle on the end surface are not allowed.
The end surfaces of two sides of grating 2mm.
Can cut beveled end surface pipe ends. .
Neat end surface, good in tightness, convenient and practical;
Cleaning, cutting edge, dirt, peel wash cut end surface of the peel, remove the skin.
Ferrule end surface pre-domed.
This production line is used for straight tube end inner and outer beveling, end surface processing and the tube end inner and outer polishing.
Its surface and end are very clean and smooth.
Can cut inclined truncation surface at the end of tubes.
The round surface and end of the bar arms eliminate any tearing, snagging and puncturing of the cloth material that may occur with standard froks.
To this end, the surface attached to a small slope that provides run-off rain and melt water into the drainage layer base paths.
Product Description The veneer after drying has the uniform moisture content flat with no buckle or end waviness The surface of the dried veneer is in good condition before gluing into plywood process The wood veneer dryer line has the salient….