Examples of using Red wire in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Red wire.
The red wire.
It's always the red wire.
The red wire?
Red wire or blue wire? .
Show me the red wire.
The red wire goes in the red hole.
Man, it's the red wire.
Don't touch red wire.- I'm not touching anything.
Did I say touch the red wires?
Cut the red wire, Chuck!
I said do not touch the red wires.
You should see the red wire attached to the motherboard.
All right, it's always the red wire.
The red wire means"+", then the black wire means.
Show me the red wire.
Red wire. Blue wire. Black is usually the ground.
Thank you. The red wire goes in the red hole.
Welding between the positive pin of the buzzer,R2, and the Red wire.
You just need to tie the RED wire into your backup lights 12V.
Connect the power of the camera to your car reverse lights- red wire to positive and.
Put the red wire where the blue wire goes in the board, okay?
Connect the power of the camera to your reverse lights- red wire to positive and black wire to negative.
The red wire solder to cigarette middle pin for"+", then the black wire solder to cigarrete metal wing single side or both sides for.
Now, you're going to plug that red wire where the blue wire goes in the board.
Vehicle USB 2.0 interfaces power supply equipment, with two ports USB maximum current 2.1A, guard cap and Ø 5.0mm positive(red wire) and negative(white wire) terminal.
Spot weld between the Red wire and the positive of the circuit of the leds of the drone.
If the DC solenoid coil has a red and a black wire, Connect Positive to RED wire and Negative to Black wire. .
The DC Connectors by 2.5 or 3.5 type for male and female, two pole or three or four pole all are available to mold. By common standard, the red wire connect to center pin, and black wire to DC shell with braiding or drain wire. As below some model for reference, by different shape, for some special one, we also need add the AB glue inside before molding.
