Examples of using Sensor can in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Sensor can be option.
Each side of the sensor can detect one particular pole.
Sensor can make deocoiler stops with machine.
The output amplitude of the sensor can be adjusted according to users requirements.
Sensor can be connected to the 12V or 24V car battary directly.
Recognition accuracy is less than 1mm, The sensor can identify the level fluctuation of less than 1mm.
The sensor can be facing downwards as well.
Check line normal, can connect the sensor power supply, the sensor can work normally.
Built-in infrared sensor, can adjust the light output automatically.
Put the sample into the interval between the two flat platens and add the speed and pressure to the sample. When compressed by the lower platen, the upper platen would be crushed and the sensor can get the pressure and change it into electrical signals to display.
The sensor can be sealed on indoor side of windows or doors of your house as you wish.
High-precisionRecognition accuracy is less than 1mm The sensor can identify the level fluctuation of less than 1mm.
The sensor can be used to get information on the usage status and crowding of bus passengers.
Non-abrasive fluids and those that are capable of coating the sensor can adversely affect the flow measurement.
The sensor can then determine tank levels, volumes, flow rate, and more depending on the model and the features.
With a 360 degree detection angle and range of 4.5 meters, the Radar Sensor can control a 200W resistive load. Perfect for low use areas and ideal for energy saving applications.
The sensor can be adjusted so that when movement stops the load will switch off after 18 seconds to 1 mins.
By scanning your QR Code, you need to put your QR Code below the door control with a distance of at least 15 centimeters. Besides, you need to adjust your phone screen brightness more than 75% so the sensor can read your code easily.
The sensitivity of the sensor can be adjusted according to the requirements of customers(suitable for different spinning processes);
Variable speed dc gear motor for elevator door G motor s GK44 series is a kind of Dc Worm Gear Motor used for elevator door This Elevator Door Gear Motor is just an operating units which is controlled by electronic control unit Sensor can be….
The SYNC interface in the sensor can transmit motion signal to other sensors connected together, and then achieve cluster control function.
Our LED Tube with Microwave Motion Sensor operates with a built-in Microwave Sensor to one end of this LED Tube, detecting movement objects. The Microwave Sensor has an induction angle of 120 degrees with up to 6-8 meters in range. The sensor can be activated by either a car or a person moving towards the light source. Once motion is detected the lux lumen will increase from 30% to 100.
Circumstance, the sensor can directly be used in the measurement of the diesel, if need to calibration, you can use the three following ways to complete.
Automatically turns on a gentle night light. It's possible to set different light settings for day and night. During the day, the sensor can trigger crisp white light to help you see better. At night, it can turn on a gentle night light when you, your partner or child gets out of bed. Just enough to help you navigate in the dark, without waking up the rest of the family.
The sensor can be mounted horizontally and vertically, and to ensure that sediment or bubbles cannot be on the measuring electrodes and the electrodes should be kept horizontally in the axial direction.
The SYNC interface in the sensor can transmit motion signal to other sensors connected together, and then achieve cluster control function.
The sensor can be used with either a data logger or a display monitor to monitor or record measurement data in industries such as exhaust temperature measurement, cylinder temperature measurement in the automotive industry or can be used with various micro-controllers, etc. We have the best equipment to our customers.
Also, the 1-10V interface in the sensor can match up with Merrytek stand-alone daylight sensor MS01, and implement daylight harvesting, means the lighting system has automated controls that either turn off or dim artificial light in response to the available daylight in the space.
Two sensors can be dismantaled, so the aftersale service can be very convenient.
Low energy consumption so sensors can run on coin cell batteries for more than a year.