Examples of using Slanted in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Slanted seat valve.
Usage of slanted shelves.
The resolution is determined for each slanted edge.
Nine Slanted Edge Structures.
CONVENIENT: Clings to any vertical, horizontal and slanted surface.
The slanted edges offer a contrast of 20% and 50.
Densities of the OECF patches, background and slanted edge pattern.
Two slanted welt pockets with zipper closure on the front panel;
The outer side has a radial embossed surface and the inner side is a slanted flank.
Each slanted shelf holds up to 400 lb. of weight;
Reinforced rotation table running support construction, fix rotation table not slanted.
Narrow and slanted tunnel is acceptable for four wheel drive system engine test and car's bevel.
Two subcharts, each with a horizantal and a vertical slanted edge, are included in the Forty-Two.
The clamp can be slanted gradually and progressively to any angle between 0° To 45° clockwise& counter-clockwise.
The TE275 is designed to measure the resolution of still cameras using slanted edges.
The chart contains nine slanted edge structures, each with two vertical and two horizontal edges and a focussing aid in the center.
Hydraulic clamping rotation holding limit device, hold rotation table before open and close, rotation table not slanted.
In the href statements as shown, and NOT the slanted ones generated by MS Smartquotes, otherwise your links will NOT be active when published.
It features eye catching Mid-century inspired design with distinctive slanted arms and sturdy hardwood legs.
The slanted edges are arranged in a way, to deliver on axis information, information at 50% field position(4:3 aspect ratio) and at 70% field position.
Welding torch realize automatic alignment through positioning tooling, which compensates negative influence by slanted tube.
Flowy and feminine, these dresses take a step off the beaten path with layered, slanted skirts and angled asymmetrical crystal bursts accented with a band….
Its beautifully crafted wooden base with slanted legs enhances its strong and sturdy construction, while its detachable cushion seats, backrests and armrests allow you to snuggle up comfortably.
The wall surface shall be leveled with cement mortar and be finely textured. Insulation board outside wall length of the anchor nail should be determined not to be too short, depending on the thickness of the board. When insulation wall panels external drilling, the hammer should be kept at 90 degrees to avoid slanted holes and to control the depth of the hole, insulation board wall panel.
The mounting base for the Seemee 20 is built at a slanted angle so when mounted on the seat post, the tail light points straight backwards horizontally, not wasting a single lumen of light to the ground.
Next to the TE268 and TE253(sinusoidal Siemens stars) and the TE252(visual appraisal of resolution) the slanted edges are the third pattern described in the ISO12233 standard for resolution measurement.
The temperature resistant and corrosion resistant alloy materials are surfacing on the slanted cone surface of the valve plate, and the structure which is fixed on the spring with the press plate to adjust the bolt assembly.
With Narrow wedge point P. Cuts the leather perpendicular to the sewing direction. On thick and hard leather it creates a prominent decorative stitch due to the heavily slanted stitch formation. The sewn thread is raised and exposed. The sewn thread fills the stitch holes. It's well suited for heel and closed seams. Equivalent systems include: PFX134P; 135X8 NW; 134PS; 134KKP.
Slant pockets sitting at front.
Eyes small, almond-shaped, slightly slanting and devoid of bulges.
