Examples of using Small flow in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Cut off small flow.
Small flow resistance.
Inlet and outlet duct layout is compact, small flow resistance.
Small Flow Control Valve.
Large filtration area, small flow resistance, high oil yield.
Large hydraulic force radius, better stability for small flow rate.
Large filtering area, small flow resistance and high oil extraction rate.
Due to the limited opening, it can only be used in small flow systems.
In the range of small flow and low lift height, can transport corrosive grinding slurry solution;
Require lower WOB, high rotary speed and small flow rate, good concentricity.
For small flows, the gas flow sensor will bring considerable heat to the gas being measured.
Its main port is gradually opened at a relatively small flow rate.
Reasonable butterfly plate structure with small flow resistance and reliable seal function.
Mutlti-jet water meter with combination display for large flow rate and small flow rate DN100.
Other remarks 7 Small flow resistance, high flow capacity and good flow characteristics.
When the vortex flow meter signal is pulse, small flow cut-off is still needed. Why?
Calibration is difficult, small flow measurement accuracy is low and the measurement is difficult to maintain stability.
Generally, the wear of bearings can be observed according to the variation of small flow characteristics.
Uniform discharges as the small flowing index, which is good at irrigation for the area of undulating terrain.
Other remarks 6 Full bore of valve convenient for pigging, of small flow resistance and high flow capacity.
Uniform discharges as the small flowing index, which is good at irrigation for the area of undulating terrain. 3.
The variable area flowmeter(metal tube rotameter) is best choice for middle to small flow range measurement.
When there is no flow or small flow, the heavy solids in the fluids are down and the fatty substances are up to be away from the electromagnetic flow meter electrodes area.
Good wear resistance, low wall friction coefficient, small flow resistance, excellent conveying ability.
It can be used to measure the flow of liquids, gases, and vapors, and is especially suitable for medium flow measurement with low flow rates and small flows.
Good wear resistance, low wall friction coefficient, small flow resistance, excellent conveying ability.
The axial gap type throttle valve is used for high performance requirement working condition because its large hydraulic force radius at throttle ports and good stability under small flow rate.
This valve is used for the higher pressure machine with small flow rate, such like an elevator as a device for safety protection.
The structure of the threaded valve is the sample, lightweight, much suitable for mobile equipment and small flow hydraulic systems.
This valve is used for the higher pressure machine with small flow rate, such like an elevator as a device for safety protection.