Examples of using Spring force in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Spring Force.
How to calculate the Gas Spring Force?
Spring Force Tester.
Spring Force Tester.
This model is not adjustable on spring force, but it can be located on 90°.
Spring force Adjustable by hex screw.
Dorrenhaus Model D706 is of hydraulic type, while with spring force of size 6.
Fixed spring force: size 3.
When flow pressure of both sides return to balance, the spring force pushes the disc back.
Ω Fixed spring force size 3, suitable for max.
Retaining the spool or returning to the de-energized position is the return spring force.
Ω Adjusting spring force size 1- 6 controlled by single adjusting valve.
When the handle is released, the piston will absorb the grease or oil into the pump chamber by the spring force.
Ω Adjustable spring force 1-6, comply with requirements of ADA.
The electromagnetic pulse valve diaphragm controls the gas pressure and the spring force to close the diaphragm.
Ω Adjusting spring force through 1 to 6, controlled by single regulating shaft.
Therefore, the slope of the characteristic curve is determined by both the spring force and the hydraulic force. .
Ω Fixed Spring Force 3, suitable for max 40- 65kg door wide 950mm.
The hydraulic pressure from the end directly overcomes the spring force and drives the valve poppet up and opens the channel.
Ω Fixed Spring Force 3, closing power adjustable from size 2 to 4 by.
The piston is held by a spring which forces the valve to open when the pressure becomes greater than the spring force.
Ω Adjustable spring force 2-4, best for medium traffic application.
The hydraulic pressure on the side acts on the area difference of the poppet to overcome the spring force directly, drive the poppet up.
Additionally, the spring force of Kimera chair can be individually adjusted.
In this way, after opening the check valve, the flow increases, the opening increases, and the spring is compressed, the spring force does not rise too quickly.
Ω Adjustable spring force through size 1 to 6, comply with ADA standard.
CNC table type plasma cutting machine adopts whole workbench, longitudinal and transverse rails are high-precision ones, longitudinal drive system offers zero clearance meshing transmission of rack and gear with strong spring force even if longtime attrition of rack and gear.
Ω Fixed spring force 3, applicable for door width 950mm or weight 40-65kg.
The hydraulic solenoid valve parts assembly utilizes this force to overcome the spring force and the liquid force, to opens or closes the corresponding flow channel.