Examples of using The cleaning process in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
How easy is the cleaning process?
Decontamination is the cleaning process using the specially formulated.
Temperature plays a crucial role in the cleaning process.
A spoon or spatula during the cleaning process should form an angle of 45 degrees.
Manual control 1. manual operate on the cleaning process.
During the cleaning process to remove mold from your environment, mold spores become airborne.
Set the control panel per manufacturers' instructions and start the cleaning process.
General, the cleaning process only takes 3minutes for your clubs and grips.
Liangjiang brand- titanium dioxide anatase A200( High whiteness), the cleaning process by sulfuric acid method.
What is removed in the cleaning process either floats on the surface or drops down as heavier sludge.
Although the effect of thousands of implosions per second is very powerful, the cleaning process is safe.
General, the cleaning process only takes 3minutes for your clubs and grips. and of course have no damage to the clubs.
Although the effects of thousands of implosions per second is very powerful, the cleaning process is safe.
The cleaning process is easy to realize automation and remote control, and can be used in large-scale cleaning work.
However, for optimal cleaning, set a suitable temperature and timing for the cleaning process.
Rainfall or irrigation during the cleaning process does not settle on the lawn puddles and immediately goes into the soil.
A: Changed whenever it becomes visibly too contaminated, or when the cleaning process is not as effective.
Contaminants removed during the cleaning process either float to the surface or sink to the bottom or remain in suspension.
A: Although the effect of thousands of implosions per second is very powerful, the cleaning process is safe.
Even large aerospace manufacturers may outsource the cleaning process to be assured parts are being cleaned and handled by experts.
Fillers with automatic clean-in-place(CIP) capabilities have long been identified as a way to speed up the cleaning process.
From the environmental point of view, the outer wall tiles in the cleaning process with acid will cause pollution to the atmosphere.
When the differential pressure of inlet and outlet reaches the pre-set value, the filter will start the cleaning process.
Circulating water in the pool Is to take the water in the pool through the cleaning process And kill germs Before being paid back into the pool by circulating thoroughly.
A pressure differential switch senses the pressure differential and when it reaches the pre-set value, the cleaning process begins.
A: Changed whenever it becomes visibly too contaminated, or when the cleaning process is not as effective.