Examples of using The flowmeter in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Why should we set low flow cutoff in the flowmeter?
Does the flowmeter require explosion protection(Exd)?
In order to prevent impurities from entering the flowmeter, a filter must be installed.
The flowmeters are widely used in industrial productions;
There should be plenty of space around the flowmeter for easy installation and maintenance.
People also translate
If necessary, the reverse valve is installed downstream to avoid damage the flowmeter.
Therefore, there is a need to ensure the flowmeter is operated at above 5.
It is recommended to install a steel Piping Flexibility in the straight pipe section after the flowmeter.
When installing, the oval gear rotation axis of the flowmeter should be parallel to the ground.
The flowmeter supplier will select the the appropriate flow meter diameter based on these parameters.
Turbine flowmeters are repeatable and accurate products among all the flowmeters.
Repeatability error: the repeatability error of the flowmeter does not exceed 1/3 of the basic error.
Perhaps, the flowmeter is very sensitive which requires pure and specific thermal properties.
There should be no strong external magnetic field interference and strong mechanical vibration around the flowmeter.
The flowmeter is a kind of meter used to measure the flow of fluid in a closed pipe or open channel.
If the gas density changes frequently, corrective measures should be taken for the flow coefficient of the flowmeter.
The flowmeter needs to be grounded reliably, but it must not be shared with the grounding of the high-power system.
Note that the turbine blades inside the flowmeter can affect accuracy even with small scratches or gaps on the blades.
The flowmeter is greatly affected by the distortion of the flow velocity distribution and the swirling flow.
Install fitting device at 2D far away from the flowmeter on both side of upstream& downstream and vibration pad should be used too.
China is now the world market controllers in the flowmeters development despite a small percentage of the upcoming companies whose significance has not been really felt.
It is not proper to operate a magnetic flowmeter close to its electrical conductivity limit due to the risk of the flowmeter turning off.
When the flowmeter is installed outdoors, it is recommended to add a protective cover to prevent rainwater sun, which will affect the service life of the flowmeter.
When we want to purchase turbine flowmeters, we must provide sufficient technical parameters to the flowmeter supplier, such as minimum, maximum and normal flow rates, ambient temperature and operation pressure, etc.
If the flowmeter needs to be installed vertically, it should be specified Silver Automation Insttruments at the time of ordering, and the product should be configured accordingly.
In order to ensure the long-term normal operation of the gas turbine flowmeter, it is necessary to check the operation status of the flowmeter frequently, perform maintenance work, and find out problems in time.
Therefore, when the fluid passes through the flowmeter sensor, it does not cause any additional pressure loss, and is one of the flowmeters with low energy consumption in the flowmeter.
Generally speaking, the choice of turbine flowmeter is mainly due to its high precision, but the higher the accuracy of the flowmeter, the more sensitive it is to the changes in the field conditions.
In order to facilitate the maintenance of the flowmeter by the user without affecting the normal circulation of the fluid, it is recommended to set the bypass conduit as shown in the figure above.
