Examples of using When the pump in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Manual operation available when the pump doesnt work.
When the pump is operating in the place where ambient temperature is.
A flow through receiver condition will exist when the pump is turned off.
When the pump is working, it is strictly forbidden to close the working area or touch the pump. .
This ball, moves totally out of the flow path when the pumping is on to give minimum head losses.
When the pump is off, the refrigerant will continue to flow through the pump and would not affect system performance.
Replacing the emergency pump quickly when the pump breaks down in harsh environment such as high temperature.
It is no need to equip check valve in the inlet and outlet to sewage efficiently when the pump separately completely.
I guess that the receiver“adapts” to the surge type from the flow-thru type only when the pump in running?
When the pump is not used for a long time, it will start for 10s every 72 hours in order to avoid the lock of the machine.
When the pump handle is pulled, the pressure will begin to higher to push the grease or oil stored in the pump chamber to lubrication point.
Low power consumption, high efficiency, damping and damping, reducing the influence of motor vibration on the pump and the impact on the motor when the pump cavitation vibration.
The pump must pay attention to maintenance after use, for example, when the pump is used up, the water in the pump should be cleaned, it is best to remove the water pipe and then rinse with water.
When the pump is filled with liquid, the impeller rotates at high speed under the drive of the driving machine, and the blade drives the liquid to rotate and produces centrifugal force. Under the action of centrifugal force, the liquid is flung out of the center of the blade from the center to the f….
Note: From the description above, the normal operation of the pump requires the oil in the outlet pipe being full, when the pump is in first operation, there is no oil in the outlet pipe of hydraulic hand pump, this is the reason why to pull and push in 3-5 times without any pressure before the working.
Full-automatic control: The pump can automatically adjust its operating state according to the user's pipe network pressure to reach the optimal operating state and make the system more energy-saving. When no water is used, it automatically maintains the pressure and goes to sleep, with obvious energy-saving effect. When the pump breaks down, it automatically performs real-time tracking, judgment and handling.
DBD Cartridge relief direct operated pressure valve is designed to limit hydraulic pressure to its presetting pressure. When the pump is starting, the oil is pressurized into to P port, then the hydraulic oil lifts up the piston pressed by a spring, until hydraulic oil squeezes out from the T port, the system pressure remains to presetting pressurenormally operation pressure.
Cartridge relief direct operated pressure valve of DBD series is designed to limit hydraulic pressure to its presetting pressure. When the pump is starting, the oil is pressurized into to P port, then the hydraulic oil lifts up the piston pressed by a spring, until hydraulic oil squeezes out from the T port, the system pressure remains to presetting pressurenormally operation pressure.
There is a thermal protector in the pump when the motor in the electric pump is lack of phase, overload, motor overheating it will cut off the power to protect the motor.
Vertical centrifugal pump stop when the imported valve.
If use piston pump, when the filling volume difference is large, the corresponding pump body needs to be replaced.
When the filtration pump has stopped, the filtrate circuits and central.
When the slurry pump is being repaired, the cover plate and frame plate are sometimes replaced together.
It will may ruin the tire rims when pump up casually.
Rubber bracket can absorb shock when pump working.
But they should revive when you pump the air back into the room.
When sizing a pump the following must be takeninto accounting.
