Examples of using Each pixel in English and their translations into Turkish
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
Each pixel has it's own address.
The column and row wires attach to transistor switches, one for each pixel.
Each pixel has a phosphor that emits one of the display's base colors.
The most beneficial aspect of TFTtechnology is its use of a separate transistor for each pixel on the display.
Each pixel on that sensor is represented by a P-doped mos capacitor.
The one-way current passing characteristic of the transistorprevents the charge that is being applied to each pixel from being drained between refreshes to a display's image.
Each pixel has two values, which are luminance and chrominance.
Transistors take up only a small fraction of the area of each pixel and the rest of the silicon film is etched away to allow light to easily pass through it.
Each pixel is a small capacitor with a layer of insulating liquid crystal sandwiched between transparent conductive ITO layers.
Select here the value which represents the radius of the circular neighborhood. Each pixel is replaced by the most frequent color occurring in a circular region defined by the radius.
Theoretically, each pixel could be individually modified to display a different image than the one represented by the incoming photons.
These displays are similar to active-matrix organic light-emitting diode(AMOLED) and MicroLED displays,in that light would be produced directly in each pixel by applying electric current to inorganic nano-particles.
Then I translated each pixel of the infrared spectrum into a pixel of the visible color spectrum.
For reflective LCDs without backlighting, JDI has developed an addressing technique using a thin-film memory deviceSRAM in addition to the conventional TFT for each pixel, so that a still image can be stored with very little energy.
And each pixel was represented by one number We had these little tape recorders that would just on this little strip chart. print one line of numbers after another.
Select here the median radius of the pixel neighborhood. The algorithm applies a digitalfilter that improves the quality of noisy images. Each pixel is replaced by the median in a set of neighboringpixels as defined by the radius.
Each pixel in the photo represents a set distance from the camera which we can measure, allowing us to accurately gauge the height and depth of each key cut.
Select here the noise reduction radius value. The algorithm smooths the contours of an image while still preserving edge information.The algorithm works by replacing each pixel with its neighbor closest in value. A neighbor is defined by the radius. If you use a radius of 0 the algorithm selects a suitable radius.
Each pixel is attached to a switch-device, which actively maintains the pixel state while other pixels are being addressed, also preventing crosstalk from inadvertently changing the state of an unaddressed pixel. .
But in fact, if I were to place one base on each pixel of this 1280x800-resolution screen, we would need 3,000 screens to take a look at the genome.
The raster resolution is 480×800 pixels, however each pixel in the PenTile RGBG display is represented by only two subpixels on average, using subpixel rendering rather than the three found in most displays, meeting the definition of WVGA according to the Video Electronics Standards Association specifications for measuring resolution.
Each sensor pixel is used to measure the capacitance at that point of the array.
Our image is blurry, so I'm replacing each bad pixel with a clear one from a neighboring frame.
An active-pixel sensor(APS) is an image sensor where each picture element("pixel") has a photodetector and an active amplifier.
Another cause of this fringing is chromatic aberration in the verysmall microlenses used to collect more light for each CCD pixel; since these lenses are tuned to correctly focus green light, the incorrect focusing of red and blue results in purple fringing around highlights.
Do not stretch or rotate pixelsFor Fuji Super CCD cameras, show the image tilted 45 degrees. For cameras with non-square pixels, do not stretch the image to its correct aspect ratio. In any case,this option guarantees that each output pixel corresponds to one RAW pixel. .
But there's another program that uses a special algorithm to extrapolate the pixels in each part of a photograph.
The"native resolution" of a display is how many physical pixels make up each row and column of the visible area on the display's output surface.
In this method of imaging, the sensor array pixels each act as one plate of a parallel-plate capacitor, the dermal layer(which is electrically conductive) acts as the other plate, and the non-conductive epidermal layer acts as a dielectric.
