Examples of using Built-in amplifier in English and their translations into Ukrainian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
With built-in amplifier.
It is a compact device with a built-in amplifier.
Channel built-in amplifier.
It has a three-band parametric equalizer, additionally built-in amplifier 4x50 watts.
Power of the built-in amplifier- 4 channels of 50 watts each.
Such an implementation is possible thanks to the built-in amplifier and 3-band equalizer.
This sub is made with a built-in amplifier, a polypropylene diffuser and a 40-ounce strontium magnet.
The main difference between passive andactive subwoofers is the lack of a built-in amplifier.
Keyboards may also have built-in amplifiers and loudspeakers.
The built-in amplifier and the presence of an equalizer allow you to completely change the sound of music in the cabin of your car.
A very practical and inexpensive model with a built-in amplifier with a maximum power of up to 150 watts.
The subwoofer speaker, offered without a case, can be classified as a passive type,as it does not have a built-in amplifier.
Separately stand out built-in amplifier and equalizer 3-band type.
Pioneer MVH-280FD is also a single-disk diskless radio with onecool chip that sets it apart from the competition the power of the built-in amplifier is 4x100 watts.
HTC BoomSound, Dual frontal stereo speakers with built-in amplifiers, Beats Audio, HDR Microphone and Sense Voice.
The built-in amplifier with a power of up to 150 W has mosfets; for optimal cooling, a special housing design has been developed.
The sound of this car radio is very high-quality,thanks to a built-in amplifier with a power of 4x50 watts.
Since each radio has a built-in amplifier and sound is reproduced through external speakers, the audio output is output in good quality.
Audio is transmitted through the car's original speakers using the car's built-in amplifier(depending on the head unit's model).
The built-in amplifier was specially designed to get maximum results, its availability greatly simplifies the installation and configuration of the subwoofer.
Wizard selection can easily select the radio on the basic criteria, such as size,power built-in amplifier, the operating system, and other advanced features.
Often when creating subwoofers, a built-in amplifier is used, then you immediately get a whole speaker system in one, which consists of speakers, an amplifier and other components placed in a specialized monoblock.
Subwoofers should also be chosen according to personal preferences- passive ones require additional installation of the amplifier, the active ones are equipped with a built-in amplifier of sound power.
Kicx ICQ 301BPA is a compact enclosed subwoofer with a built-in amplifier and 12-inch speaker, which guarantees powerful and rhythmic sound reproduction at low frequencies.
Subheading 852712 covers only cassette-players with built-in amplifier, without built-in loudspeaker, capable of operating without an external source of electric power and the dimensions of which do not exceed 170 mm× 100 mm× 45 mm.
But they also have drawbacks, in particular,it can be noted that most often when using the built-in amplifier, the options for adjusting the sound playback are slightly limited, in this case it is impossible to affect the parameters of the built-in amplifier and you need to choose from ready-made models of active subwoofers offered manufacturers.
RCI multi-port amplifier with built-in PON diplexer.
A built-in 10W amplifier provides enough volume for outdoor use.
Single receiver with built-in power amplifier module, a significant increase in receiver.
Powerful and Long-time Working, Built-in power amplifier module, stronger signal, 60 minutes working time.