Examples of using A compressor in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Why should I use a compressor?
A compressor allows me to reduce the dynamic range.
It should have a compressor and equalizer.
The second aspect of it is- if you look at oil in a compressor.
S&A compressor water chillers CW-5200 are able to cool a single 8KW CNC spindle.
People also translate
As with most industrial machinery, a compressor runs more efficiently when properly maintained.
A compressor/ limiter attenuates or limits signals exceeding a pre-defined signal level.
It is worth noting that the price of a compressor cannot be based solely on the up front purchase price of the unit.
Each track is driven independently by air motor with enclosed gear drive,the gradeability arrives 35° with a compressor, or 50° alone.
So, if a compressor has a rating of 25 cfm at 100 psi, it should be 150 cubic feet, minimum.
For example, if a tool requires 2 CFM at 90 PSI,select a compressor that delivers at least 3 CFM at 90 PSI.
This is so you can have an informed decision on your choice andbe certain on what to look for in terms of a compressor type.
Each bus mix features a compressor, 4 band EQ, BSS graphic EQ and delay always available all of the time.
Rotorcomp unique series of EVO-NK compact units are oil-injected screwcompressor modules that integrate the main parts of a compressor system.
The first one is energy cost-the cost of running a compressor during its life cycle, which is anywhere between 10- 12 years.
A compressor saves you time, because pneumatic tools have the power to complete functions like spraying, nailing, hammering and sanding in a….
For example, a recent a 75 kW motor on a compressor was monitored and found to have an absorbed power of 83 kW on load.
The car refrigerator is a continuation of the domestic refrigerator,and can be cooled by a semiconductor electronic refrigeration technology or by a compressor.
In reality, not that long ago, a compressor wasn't a thing you would have located in a factory or industrial unit.
These types of dehydration systems are best suited for large volumes of gas under very high pressure,and are thus usually located on a pipeline downstream of a compressor station.
For the customer,the most critical factor when choosing a compressor should be the volume of air(CFM) that the air compressor generates.
Choose a compressor for an aquarium An air pump, or a compressor, is an apparatus that provides aeration of water, enriching it with dissolved oxygen.
In contrast, our novel membrane and water-based cooling technology is very eco-friendly-it can provide cool and dry air without using a compressor and chemical refrigerants.
Using CFM to rate a compressor is incorrect because it represents a flow rate that is independent of a pressure reference. i.e. 20 CFM at 60 PSI.
The economic application depends upon the size of the chilling plant,the minimum size to consider installing LPA would be on a compressor of at least 100 kW electrical load, based on an 8,000 hour operating period.
These numbers canbe very useful to help determine if a compressor produces enough CFM for the desired application, but can be confusing when comparing differing pressures or volumes or different compressors. .
Current engines operate at temperatures that are actually higher than the melting point of the nickel metal alloys used inside them; to keep them from melting,the engine diverts air from a compressor inside the engine through tiny holes in the parts, creating a protective cooling layer.
These numbers can be very useful in determining if a compressor produces enough volume for the application, but they can be confusing when you try to compare different compressors or compressors rated at different pressures.
These could be something we use every day, such as the valve in a sink faucet,or something more critical like a compressor part in the jet engine of an airplane,” said James Mann, assistant professor of mechanical engineering at the University of West Florida and Purdue alumnus.
Buy an aquarium of 20-30 liters(some 1500-2000 rub), a compressor(filter)- it purifies water and draws oxygen into it(500- 600 rub), a thermometer(from 40 to 150 rub), a good book on breeding aquarium fish where there is a photo and description of the habitat(150- 1000 rubles).