Examples of using Cathodes in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Renewable Design for Copper Cathodes 99.99% Pur….
Lithium-ion cells with cobalt cathodes hold twice the energy of nickel-based battery and four times that of lead-acid.
Perfect control of proportion of anodes and cathodes.
Haohai Metal manufactures sputtering targets and cathodes for the deposition of hard coatings.
If you use two LEDs instead of one bicolor,You must connect a bridge between the cathodes of both;
Cobalt is a critical component in lithium-ion battery cathodes for high energy and power applications.
The F5 takes advantage of Sony's innovative BP-FL75 battery pack, which uses Olivine- Lithium Iron Phosphate-instead of conventional Lithium Ion cathodes.
Cleaning the heaters, chamber shields, arc cathodes, rotary rack etc.
Note that, especially in larger cathodes, the magnets can be several individual segments rather than one solid piece.
To remove this shortcoming Polish scientists have suggested that the cathodes should be coated with magnesium oxide.
Sputter cathodes are normally water cooled, generally involving a copper backing plate that is directly water cooled, with the target either bonded or clamped to it.
Longevity is another issue because the polymers and reactive metal cathodes oxidize when exposed to water and oxygen.
Planar Magnetrons, and their close cousins the clamp-on inset target Magnetrons, allow the user to achieve higher sputterdeposition rates than simple diode configuration cathodes.
Two plastic films, one with the anodes and the other with the cathodes, are covered by the active material before the complete unit is laminated together.
For example, in copper refining, copper anodes, an intermediate product from the furnaces, are electrolysed in an appropriate solution(such as sulfuric acid)to yield high purity(99.99%) cathodes.
The team in Australia has reconfigured the design of sulfur cathodes so that they are able to withstand higher stress loads without seeing a drop in overall performance.
Tungsten Rhenium Wire: This tungsten product is mainly used for the production of dual tungsten rhenium wires, electrodes of high-performance lamps,electrodes of laser and cathodes of electron tubes, etc.
However, in most Planar Magnetron Sputtering systems,there are multiple cathodes in fairly close proximity to each other, and you do not want stray north/ south fields formed in between the targets.
Results so far show that using oxalic acid and citric acid, two of the organic acids generated by the fungi, up to 85 percentof the lithium and up to 48 percent of the cobalt from the cathodes of spent batteries were extracted.
For this reason,it is entirely desirable to make sure all the cathodes in one system are aligned the same way, either all north on their perimeters, or all south on their perimeters.
By breaking away from existing limitations, we now no longer need to rely on glass substrates and glass encapsulation- we can turn the OLED upside down,maintain conductivity with alternative anodes and cathodes, process the device in a new way and protect it with a thin film.
Unlike today's recycling methods, which break down cathodes into separate elements that have to be put together again, the new technique spits out compounds that are ready to go into a new battery.
Civen RA Copper Foil is rolled from pure copper ingots, the process including purifying copper ores,make into copper cathodes, ingoting, rolling, annealing, washing, testing, slitting and packing.
Although more complex patterns can be done, most cathodes- including virtually all circular and rectangular ones- have a simple concentric magnet pattern with the center being one pole and the perimeter the opposite.
In 2014, scientists from Rice University discovered that graphene, when mixed with vanadium oxide,will create cathodes that can charge 90 percent of battery capacity just after 20 seconds.
When Konstantinos Gerasopoulos, a senior researcher at APL and research leader,found a way to attach existing cathodes and anodes with the new electrolyte, they created a unique battery.
And for facilities with multiple sputter systems,it is likewise desirable to make them all the same so that cathodes can safely be exchanged between the systems without worrying about magnet alignment.
Using the same materials in standard lithium-ion batteries,the researchers reconfigured the design of sulphur cathodes so they could accommodate higher stress loads without a drop in overall capacity or performance.
Last year in May, Rice University researchers unearthed the fact that when graphene is mixed with vanadium oxide,it can create battery cathodes that can recharge in 20 seconds and hold back 90% of its capacity, even when used 1,000 times.