Examples of using Enough temperature in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
The stuffing inside the turkey may not reach a high enough temperature to kill all bacteria.
Once the core reaches a high enough temperature, it ignites violently in the helium flash, which begins helium core burning on the horizontal branch.
So to keep complete removal of the cottonseed hull, the high enough temperature and the sufficient time is necessary.
Some oxides, especially of weakly electropositivemetals decompose when heated to high enough temperature.
At that point,the core of the star is not at a high enough temperature to fuse carbon, and so it enters a super red-giant phase.
The metal flakes heat up until they are incandescent and shine brightly or,at a high enough temperature, actually burn.
If some types of e-waste aren't incinerated at a high enough temperature, dioxins, which can cause cancer and developmental problems, infiltrate the food supply.
Coffee and tea are brewed using this water, it said,but don't typically reach hot enough temperatures to kill E. coli.
Secondly, cooling a body to a low enough temperature slows chemical processes in cells and tissues sufficiently to prevent any further degradation of the body.
Even a strong La Niña event(the cooler opposite of El Niño), which some analysts are forecasting,is unlikely to produce cold enough temperatures.
(Laughter) What we're shooting foris a runaway greenhouse effect: enough temperature rise to see a lot of that ice on Mars-- especially the ice in the ground-- melt.
This format is also useful for describing the firing process of clay as the kaolinite loses the 2 water molecules, termed the chemical water,when fired to a high enough temperature.
However, if too much is used, or the bread is not baked long enough orat a high enough temperature, then a potentially harmful amount will remain.
Bacteria and other pathogens thrive in undercooked meat and seafood," says Krieger, so expectant women need to take extracare that their meats are heated to a high enough temperature.
And resulting polymersneed to be stable up to a high enough temperature that, say, pouring hot coffee into a cup made of them won't destabilize the chains and make the plastic melt into a sticky puddle.
However, if too much of the additive isused, or the bread is not baked long enough or at a high enough temperature, then a residual amount will remain.
And resulting polymersneed to be stable up to a high enough temperature that, say, pouring hot coffee into a cup made of them won't destabilize the chains and make the plastic melt into a sticky puddle.
However, if too much of the additive is used, or the bread is not baked long enough orat a high enough temperature, then a residual amount will remain.
At high enough temperatures, particles have so much energy that whenever they collide many different particle/antiparticle pairs would be produced- and although some of these particles would annihilate on hitting antiparticles, they would be produced more rap-idly than they could annihilate.
However, if too much is added, or if the bread is not baked long enough ornot at a high enough temperature, then a residual amount will remain, which may be harmful if consumed.
The goal with HCCI and partial HCCI is to create a better combustion technology plus a fuel with the right balance of octane and cetane, something that will ignite uniformly and at exactly the right moment for optimum, lower-temperature combustion,with enough heat to burn cleanly but at a low enough temperature to avoid producing NOx.”.
However, if too much is added, or if the bread is not baked long enough ornot at a high enough temperature, then a residual amount will remain, which may be harmful if consumed.
What the team has been able to do here is use an ion beam to tune the properties of a plastic film so that it conducts electricity like the metals used in the electrical wires themselves, and even to act as a superconductor andpass electric current without resistance if cooled to low enough temperature," says Professor Meredith.
For example, if warm chocolate that contains milk was poured into a mold butdid not get heated to a high enough temperature, then a product with no milk could be used afterward in the same mold and still be given the“OU” label.
Earthenware is glazed or unglazed nonvitreous pottery[2] that has normally been fired below 1200 °C.[3] Porcelain, bone china, and stoneware,all fired at high enough temperatures to vitrify, are the main other important types of pottery.
Characteristics: Delicate, soft enough, high temperature.
Room temperature is just enough.