Examples of using Ethernet frame in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
An IEEE 802.3 ethernet frame includes the following.
EtherType is a two-octet field in an Ethernet frame.
The format of an 802.3 Ethernet frame consists of these components.
Ethernet frames are said to be self-identifying, because of the frame type.
MAC Addresses and Ethernet frames are on the Data Link layer.
An 802.1Q tag consists of 32 bits(4 bytes)of data inserted into the Ethernet frame header.
I need to send Ethernet frames from one BBB to the other BBB. I already got….
Converged SANs adopt Fibre Channel over Ethernet(FCoE),which encapsulates FC payloads into Ethernet frames.
An Ethernet frame has a minimum size of 64 bytes and a maximum size of 1518 bytes.
MACsec frame format, which is similar to the Ethernet frame, but includes additional fields.
Step 1 Larry encapsulates the IP packet between an Ethernet header and Ethernet trailer,creating an Ethernet frame.
Features such as the 48-bit MAC Address and Ethernet frame format have influenced other networking protocols.
Different kernel modules are used for different protocols- iptables applies to IPv4, ip6tables to IPv6, arptables to ARP,and ebtables to Ethernet frames.
A runt frame is an Ethernet frame that is less than the IEEE 802.3's minimum length of 64 octets.
Because of this ambiguity,a multicast host faces a small problem when it receives an Ethernet frame destined for a multicast MAC address.
Most networking protocols(IP, Ethernet, frame relay, etc.) use packets that are, on average, significantly larger.
The adapter obtains a network-layer PDU from its parent node,prepares an Ethernet frame, and puts the frame in an adapter buffer.
The VTEP receives standard layer-2 Ethernet frames, selects the correct VNI and forms an IP UDP packet for transmission to one or more destination VTEPs.
The SFD is the eight-bit(one-byte) value that marks the end of the preamble, which is the first field of an Ethernet packet,and indicates the beginning of the Ethernet frame.
At Layer 2, however,a switch can examine only the Ethernet frame header to find the source and destination MAC addresses.
An Ethernet frame can be between 64 and 1518 bytes long, but the Ethernet frame itself uses at least 18 bytes; therefore, the data in an Ethernet frame can be between 46 and 1500 bytes long.
The VLAN identifier or tag consists of 12 bits in the Ethernet frame, creating an inherent limit of 4,096 VLANs on a LAN.
In addition, all four Ethernet frame types may optionally contain an IEEE 802.1Q tag to identify what VLAN it belongs to and its priority(quality of service).
It takes over 80,000 standard Ethernet frames per second to fill a gigabit Ethernet pipe, consuming a lot of CPU cycles and overhead.
Step 4 Router R1 de-encapsulates the IP packet from the Ethernet frame by removing and discarding the Ethernet header and trailer.
An Ethernet frame can be between 64 and 1518 bytes long, but the Ethernet frame itself uses at least 18 bytes; therefore, the data in an Ethernet frame can be between 46 and 1500 bytes long.
In modern implementations of Ethernet, the field within the Ethernet frame used to describe the EtherType also can be used to represent the size of the payload of the Ethernet Frame.
The standard defines MACsec frame format,which is similar to the Ethernet frame, but includes additional fields: Security Tag, which is an extension of the EtherType Message authentication code(ICV) Secure Connectivity Associations that represent groups of stations connected via unidirectional Secure Channels Security Associations within each secure channel.
Current cable modem systems use an Ethernet frame format to transfer data through upstream and downstream data channels.