Examples of using Multicast group in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
For the multicast group.
Are destined to a particular multicast group.
Support for 10,000 IP multicast groups and 10.2 million multicast routes.
Addressed to a specific multicast group.
A host can join a multicast group by sending a request to its local router.
Maintained for each multicast group.
We tested with 10,000 unique IPv4 multicast group addresses, nearly twice as many groups than in any previous Network World project.
This address is called a multicast group.
If no hosts have registered for the multicast group with the router(via IGMP), the router sends a Prune message to its neighbor, toward the source.
Nanoprobes do not join the multicast group.
For example, the IGMP protocol updates multicast group tables every 125 seconds, so if a network cable becomes disconnected or an Ethernet switch loses power, your multicast video streams will not be immediately redirected to the backup path, which is why you lose the video frames.
Deleted from the multicast group.
In the multicast model,multiple hosts simultaneously receive data sent to the multicast group.
Joining a Multicast Group.
Requests are acknowledged by the receiver unless they are sent to a multicast group.
Nodes can join or leave a multicast group at any time.
Packets that are sent to the multicast address go to all members of the multicast group.
Nodes can join or leave a multicast group at any time.
All the devices which are interested in receiving themessages will have to first join the multicast group.
A machine may join or leave a multicast group at any time.
One of the challenges in deploying IP multicast is that routers andfirewalls between LANs must allow the passage of packets destined to multicast groups.
The hosts can join or leave a multicast group at any time.
All hosts interested in that multicast information, need to join that multicast group first.
A process can ask the host to join a multicast group by using the following socket.
These first 4 bits account for a portion of the IP address;the remaining 28 bits are used for multicast group identification.
When a Layer 2 switch receives this CGMP information,it becomes a simple task to add the multicast group and associated hosts to its CAM.
Notice that a router does not need tokeep a complete host membership list for each multicast group that is active.
Hosts that want to receive data from a multicast source can join orleave a multicast group dynamically.
The CGMP messages include the requesting host's MAC address,along with the MAC address of the multicast group it wants to join or leave.
However, the use of the all-nodes group is not recommended,and most IPv6 protocols use a dedicated link-local multicast group to avoid disturbing every interface in the network.