Examples of using Reflective layer in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
It is used as the reflective layer on some high-end CDs.
The use of cleaning fluid andalcohol may penetrate to cause the reflective layer to fall off.
Gold is used as the reflective layer on some high-endCDs.
UV reflective layer limit the decomposition of chlorine thus saving the amount of chemicals used daily.
On a LCD screen there are basically three reflective layers, and each of them reflects and causes glare.
This reflective layer can balance the effect of visible light and block UV rays harmful to humans.
The pressure resistance is strong, reflective effect is good,strong adhesion, reflective layer is.
The greenhouse with a reflective layer, which has important advantages, stands out among the near-wall buildings.
Despite the use of aluminum in generic mirrors,aluminum is not always used as the reflective layer for a solar mirror.
Strepsirrhines have a reflective layer in the eye, called a tapetum lucidum that helps them see better at night.
When the silver reaches the aluminium, an electric short circuit forms,and galvanic corrosion then rapidly degrades the reflective layers.
After approximately 48 hours, the reflective layer becomes unreadable as the laser cannot reflect on the layer.[3].
Many other mechanisms are proposed for this slower, less controlled"backup" method of data destruction,ranging from corrosion of the reflective layers to degradation of the polymer matrix of the disc itself.[6].
Water-based ferrofluids hold the reflective layer effectively, but water evaporates so quickly that the mirror could disappear within hours.
Another reason why cat can seebetter in semi darkness is because they have a reflective layer behind the retina called tapetum lucidum.
The reflective layer is designed to reflect the maximum amount of solar energy incident upon it, back through the glass substrate.
A ferrofluid mirror is controlled by a number of actuators, often arranged in a hexagonal array.[3][4] Pure ferrofluids have low reflectivity,so they must be coated with a reflective layer.
The use of silver as the reflective layer is claimed to lead to higher efficiency levels, because it is the most reflective metal.
The primary mirror of a reflecting telescope is a spherical or parabolic shaped disks of polished reflective metal(speculum metal up to the mid 19th century), or in later telescopes,glass or other material coated with a reflective layer.
A solar mirror contains a substrate with a reflective layer for reflecting the solar energy, and in most cases an interference layer. .
A reflective layer behind the cat's retina called the tapetum lucidum reflects incoming light and bounces it back off the cones, making more use of the existing light.
PERC creates passivation of the solar cells' rear sides,which occurs by installing a reflective layer that captures previously unused sunlight and returning it to the cell, where it can be converted into solar electricity.
Additionally, other methods of the disc degradation are proposed to be deployed together with the primary one; the concern of the technology developers here is that while the dye oxidation mechanism prevents the disc from being read by current consumer technologies, the information on the disc,recorded in the pattern of the pits in the reflective layer, remains intact and could be recovered.
One of the methods is to make the two reflective layers in the DVD-9 disc of different metals(e.g. aluminium and silver), and separate them with an ionic conductor separator.
Cats, classically nighttime hunters, have evolved with a reflective layer maximizing the amount of light the eye can detect, granting them excellent night vision, as well as their signature glow.
Cool color parkinglots are parking lots made with a reflective layer of paint.[3] Cool pavements which are designed to reflect solar radiation may use modified mixes, reflective coatings, permeable pavements, and vegetated pavements.[4].
Aluminum layer provides the reflective qualities and opacity desired in metallic foils. Adhesive coat serves.
This highly reflective cloud layer exists between 28 miles and 40 miles, with a haze of sulphuric acid droplets underneath down to about 20 miles.
The layer comprises a highly reflective thin metal film, usually either silver or aluminum, but occasionally other metals.
The highly reflective surface is created by inducing a silver mirror reaction(a chemical reaction between a solution of silver ions and a reducing agent) that forms a layer of pure silver(Ag).
