Examples of using Silicones in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Home Silicones& Sealants.
Careful with the silicones.
Silicones do not dissolve in water.
Special Phenyl silicones can be used down to -148°F.
Silicones will lead to build-up, while alcohol will make it turn dry.[14].
People were literally telling me you can't do this without silicones,” Twine says.
In contrast, silicones are always synthetically produced.
Give your hair one last wash with a strong shampoo,to get rid of any remaining silicones.
For Silicones the service temperatures are from -60 C to 225 C.
(ij) Prepared hydraulic fluids based on polyglycols, silicones or other polymers of Chapter 39(heading 38.19);
Like most silicones, this ingredient has a unique fluidity that makes it easily spreadable.
Polymer based micro molded products findapplications in almost all of the application areas where silicones are being used.
One-part silicones cure by absorbing atmospheric moisture, which helps in the professional installation.
Automotive body manufacturing plants and paint shops avoid silicones, as they may cause“fish eyes”, small, circular craters in the finish.
From silicones in all formulations of cosmetics for hair I refused a year and a half ago(nemawashi, the balm, shampoos, etc.).
If you haven't had luck with products that contain silicones, it may be because the ingredient can increase the penetration of other ingredients.
Silicones are also highly permeable to gases and are generally not recommended for exposure to ketones(MEK, acetone) or concentrated acids.
Petrolatum in a minimum concentration of 5% is the most effective occlusive followed by lanolin,mineral oil, and silicones such as dimethicone.
Silicones are also highly permeable to gases and are generally not recommended for exposure to ketones(MEK, acetone) or concentrated acids.
Many groups have designed soft robots from rubbers like silicones, but Zhao points out that such materials are not as biocompatible as hydrogels.
Silicones also have the advantage of little exothermic heat rise during cure, low toxicity, good electrical properties and high purity.
E900 Dimethyl polysiloxane, PDMS dimethicone Dimethylpolysiloxane and Polydimethylsiloxane are the most common synthetic polymer of the siloxane polymer group,commonly known as silicones.
If you are acne-prone, I consider silicones among the most important ingredients to avoid- maybe even THE most important.
Silicones also have the advantage of little heat increase in the curing process, low toxicity, good electrical properties, and high purity.
I often read inreviews that the girls complain that they can't do without silicones, without them, the hair looks awful, but without chemicals hair look and become what they really are….
Silicones are highly resistant to high and low temperatures, resist degradation by UV rays, repel water, and exhibit a range of other characteristics.
ROLE: There are numerous forms of silicones used in cosmetic products, particularly leave-on skincare products as they give a soft feeling to the formulas.
As additives, silicones, and in particular polydimethylsiloxane(PDMS), are used to improve mold filling, surface appearance, mold release, surface lubricity and wear resistance.
However, the use of cosmetics with silicones for long periods of time is harmful for both the hair and scalp, because the silicone accumulated on the surface of the hair, artificially thickens the structure.
Yes, we do consider silicones a safer alternative to Teflon and similar nonstick cookware that may have perfluorinated chemicals, but we would opt to use it only when there is really no other choice.