Examples of using The sensors can in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
But that's not all the sensors can do.
The sensors can operate for years without having to replace the batteries.
For example, the response speed of the sensors can be changed.
The sensors can detect abnormal access and turnstile system will stay locked.
When activated, if the car in front of you speeds up or slows down, the sensors can detect the change and your car follows suit.
People also translate
The sensors can tell that the braking in front of you is serious enough that it has to act.
By tracking how fast the sweat moves through the microfluidic, the sensors can report how much a person is sweating, or their sweat rate.
At some hospitals, the sensors can send the details about your baby's heart rate and your contractions to a remote monitor.
On top of the basic material,they can apply different chemical interfaces so the sensors can test for a variety of pollution issues.
The sensors can be designed to sense material with dielectric constants as low as 1.1(coke and fly ash) and as high as 88(water) or more.
When activated, if the car in front of you speeds up or slows down, the sensors can detect the change and your car follows suit Our performance standards are simple.
The sensors can collect information about the soil moisture to tellthe farmer how much to water the crops, but you don't actually need the farmer.
Radar scan signal issued by the sensors can penetrate wooden doors, glass and a thin wall( installation can be concealed for anti-theft searchlight).
The sensors can collect information about the soil moisture to tellthe farmer how much to water the crops, but you don't actually need the farmer.
Called"electronic tongue" technology, the sensors can detect substances in parts per trillion and would trigger a colour change in the packaging to alert the consumer if a food has become contaminated or if it has begun to spoil.
Also, the 1-10V interface in the sensors can match up with Merrytek stand-alone daylight sensor MS01, and implement daylight harvesting, means the lighting system has automated controls that either turn off or dim artificial light in response to the available daylight in the space.
In particular, the sensor can be used to determine the type of beverage and the amount of alcohol it contains.
Through SCCB bus control, the sensor can output the whole frame, sampling, and various resolution of 8 bits of data.
The sensors could help to diagnose gastrointestinal issues way before patients begin presenting symptoms.
The sensor can be used to get information on the usage status and crowding of bus passengers.
The sensor can be activated by either a car or a person moving towards the light source.
The sensor can then determine tank levels, volumes, flow rate, and more depending on the model and the features.
The sensor can be wall or ceiling mounted and is designed for the automatic switching of lighting.
The sensor could detect a wide range of pressures and motions in both wet and dry environments.
The sensor can track the motion and location of a person in a burning building, mineshaft, or other hazardous environment, alerting someone outside if the movement stops.
With four channels the sensor can get temperature from four separate areas, and transmit the temperature to the centralized HVAC controller or other device.
The sensor can be mounted directly on the tap, various adapters are included in the box to ensure compatibility with all types of taps and it is very easy to install and use.