Voorbeelden van het gebruik van A maximum thickness in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
MTK Other, of a maximum thickness.
A maximum thickness of 20mm from the sensor to the touch surface.
For chopping boards with a maximum thickness of 25 mm.
The elements are first primed with TEKNOSAFE 2407 to a minimum layer thickness of 350 g/m² and then coated with AQUATOP 2600-23 to a maximum thickness of 150 g/m².
Door closers having a maximum thickness of 950mm and weighing about 60kg.
The cat flap is suitable for doors with a maximum thickness of 54 mm.
Specially designed for angles with a maximum thickness of 2,5 mm.
The floor element has a maximum thickness of 18 cm and a maximum width of 120 cm and can be produced at an acceptable cost.
Its hull consisted of welded steel with a maximum thickness of 50 mm.
The Wetterstein limestone has a maximum thickness of about 1000 m,
tables or walls with a maximum thickness of 35mm.
The Quadria brackets are suited for shelves with a maximum thickness of 6 mm.
This basket can be placed on any spit with a maximum thickness of 12 MM for round spits and 10 MM for square spits.
This standard cylinder configuration is suitable for installation in doors that have a maximum thickness of 48mm.
Description: This tool is used for cutting angles with a maximum thickness of 2,5 mm 220030-3000 and 22017.
These closers products Tesa have also been designed to be adapted to doors that have a maximum thickness of 950 mm.
The electrically powered machine bindsDIN A4booksup to a maximum thickness of 19mm and is activated via a foot pedal.
clear inks on flexible as well as rigid substrates with a maximum thickness of 15 cm.
glass or brick with a maximum thickness of 5 cm.
Mono-layer A mono-layer is a product layer that has a maximum thickness of one piece;
hard substrates with a maximum thickness of 15 cm.
Our modern guillotine shears equipped with CNC controls can process sheet steel to a maximum thickness of 15 mm and even up to a length of 8 metres.
The test is performed on samples with a maximum dimension of 150 x 150 mm and a maximum thickness of 12,7 mm.
fibreboard materials up to a maximum thickness of 25mm(0.98") as well as normal gypsum and mixed plaster.
The filler is applied by inox trowel in one or two passes at a maximum thickness of 1 mm in total.
removable sealing compound(e.g. Terostat 2759 with a maximum thickness of 1 mm). Please pay attention to the installation instructions.
Maximum thickness of a stem in line spaces.