Voorbeelden van het gebruik van Adjustment screw in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
Make and type of idling adjustment screw:….
Adjustment screws for idle running- LADA. shop.
Balance wheel: GLUCYDUR, 2个swing, four adjustment screws.
The adjustment screw is both sensitive and precise.
The sax is easy to adjust through the adjustment screws.
Adjustment screw 16. bottom plate 17. output case.
Built-in spirit levels and 4 adjustment screws for perpendicular drilling.
Adjustment screw to suppress body movements accurately.
Air/fuel supply system/ Adjustment screws for idle running.
An adjustment screw can be used to change the orientation of the holder.
Horizontal and vertical spirit levels and four adjustment screws for perpendicular drilling.
Continuous vertical adjustment of +4 mm to -4 mm by turning in or out the adjustment screw.
X M5 height adjustment screws with punch sleeves.
Note: We recommend using a lubricating paste to reduce wear to the adjustment screw.
What provisions(adjustment screws) are available to correct the deviations?
The pedal itself features adjustable volume and a torque adjustment screw to to suit your preference.
New large-headed adjustment screws mean more precise adjustments. .
5° scale on housing with integrated fine adjustment screw.
Adjustment screw(adjustment bolt or shock absorber)
Vibration-isolation mounts reduce noise and vibration Single adjustment screw for 270° of blower rotation.
Additionally a torque adjustment screw is also provided to adjust the torque to your personal preference.
LubriKit can also be used for all contact points with floating bridges and string height adjustment screws.
Milling devices contain adjustment screws, which contributes to the fixing of the tool in a stationary position.
Impeller clearance can be adjusted by tightening or loosening the adjustment screws at the bottom of the suction cover.
For example, the ground food is thinner if the clearance between the grindstones is increased by loosening the adjustment screw;
Traditionally Hi-Hat stands have pedals directly bellow the cymbals with an adjustment screw on the vertical tube,
saddle height adjustment screws.
the gas volume is now modified via the adjustment screw(gas throttle),
The impeller clearance can easily be adjusted simply by tightening or loosening the adjustment screws at the bottom of the suction cover.
Blind hole bearing workshop pullers, keeping the extractor expandable retainer and maneuvering the adjustment screw, it grips the workpiece to be extracted(bearing,