Voorbeelden van het gebruik van Angle of rotation in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
The angle of rotation should not exceed 90 degrees.
size, and angle of rotation.
Determines the angle of rotation for the brush.
High-precision detection of the angle of rotation.
Angle of rotation: 45 degree/grade, full angle of rotation is 180….
On the toolbar, under Rotate& Flip, select an angle of rotation.
The panel also shows the angle of rotation of the crop marquee.
the sharper the angle of rotation.
Maximum angle of rotation 210° maximum bending speed 3.3 rpm.
Rigid motorized stopper, no matter what angle of rotation you select.
The angle of rotation about which the plane of polarization rotates,
The amount by which the light is rotated is known as the angle of rotation.
High-precision detection of the angle of rotation with magnetic encoder.
Our BMI magnetic encoder is used for high-precision detection of the angle of rotation.
What's more, the angle of rotation can be adjusted from 270° all the way to 1080°!
Coil can be used for 4x90 degree angle or any angle of rotation.
To adjust the wheel's angle of rotation, please check out the following link.
measurements can be made in which every 1 degree angle of rotation is measured.
Adjustment of the angle of rotation(up to 45°) is made steplessly by means of a button for the blade.
put numbers in the setting of the angle of rotation is possible decimal point.
The angle of rotation is measured on the fly wheel where 0° is defined as the highest position of the power piston TPD.
Therefore point devices are used for general lighting arrangement, which can be adjusted the angle of rotation.
Lighting effects largely depend on the angle of rotation of the lamp with respect to the facade,
the use of which is dictated by the angle of rotation of the ladder.
Install ceiling lights, you can adjust the angle of rotation, the light should fall only on the wall,
accordance with the method described in 6.2.2.1, point A, substituting 45° as the angle of rotation in place of the 900 specified there.
Bit resolution(65536 values on the wheel's steering axis)Adjustable angle of rotation: from 270° to 900°Internal memory
Head"angle of rotation" and large
an arbitrary 3-dimensional rotation can be specified by an axis of rotation together with an angle of rotation about this axis.
Moreover, due to the small operation difference between the size of the gas and the angle of rotation, the difference between the size of the gas and the angle of rotation directly determines the shape of the cup after molding.