Voorbeelden van het gebruik van Clock signal in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
The clock signal enters at pin 3 of IC206 74HC04.
Crystal board: 32.768KHz provides precise clock signal.
Two global clock signals with optional inversion.
The ntpd daemon will then switch over to the PPS clock signal.
Up to six global clock signals and four global clear signals. .
Here can be seen that the jitter of the clock signal is 66.9ps RMS.
The shorter the clock signal, the smaller the transmission line effect.
With only a few discrete parts and an inverter, the clock signal is generated.
It is important to generate a clock signal with the least possible amount of jitter.
A clock signal, like the one that is used in a CD player,
This deviation in time of the clock signal is called jitter.
For dividing clock signals or for generating sub-octaves Output: Rectangular waveform.
Therefore, differential wiring cannot be used for a clock signal with only one output.
Mainly used in some clock signals, such as CIClk,
Digitally-compensated clock accuracy for the highest precision of generated clock signals.
This pin contains a clock signal referenced to the Sense(-) pin.
in this case the square wave of the clock signal, is called jitter.
The absence of a clock signal makes an asynchronous communication channel cheaper to operate.
The data are transmitted in synchronism with the clock signal from the subsequent electronics.
In the synchronisation circuit(29), the clock signal of the B-scan memory is divided
Technically this is achieved by not only at a rising edge of the clock signal, but at a falling edge of a data bit is transmitted.
Because of this, the flanks of the clock signal do not correspond exactly with the right time-interval UI.
When this knob is set at 12 o clock, the signal is muted.
