Voorbeelden van het gebruik van Downpipe in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
Half round gutter with downpipe in light grey| PREFA.
The gaskets sits between manifold and downpipe.
Note! Under the downpipe livnevki mounted vertically.
Free draining through attics or with connected downpipe.
Therefore, no downpipe is required for the use of this bong.
Racing exhaust/ 5 segmented downpipe/ ROAD design.
Downpipe bolt M8, connecting the downpipe to the turbo.
bongs with a metal downpipe.
Half-round guttering and gutter downpipe on the front elevation.
The downpipe is usually made of metal
Total weight including stainless steel downpipe/manifold: 3.8 Kg.
More info OEM-Parts downpipe with integrated catalytic converter.
Water runs from the water tank through a downpipe into the heater.
The metal downpipe has a length of 55mm(measured up to the thread).
I put in an order for the 3" Tullet manifold with the downpipe.
Exhaust DS. Complete including downpipe, rear silencer and mounting kit 1965->
A downpipe connects the exhaust manifold
SitaStandard with retaining element and downpipe in a non-ventilated roof structure.
For downpipe, adapter bowl
With this Stage1 tuning we advise our customers to mount a downpipe.
Brief description: Downpipe bolt M8, connecting the downpipe to the turbo.
Wall Cladding 50MM ALC PANEL or PU sandwich panel downpipe system PVC downpipe system.
Depending on the downpipe and bowl you can upgrade your bong with additional accessories.
This percolator bong is suitable for all downpipe/ adapters with a 18.8MM joint size.
garages doors downpipe.
Grotere turbo, VVT custom made downpipe chip op maat 160pk 340Nm.
To prevent the downpipe from clogging again, you can cover it off after cleaning with a special sieve or mesh.
Take into account the dimensions regarding the connections of your bong, downpipe, adapter and bowl.
The connection point to the downpipe in older buildings is often a few centimetres too high.
Easy to affix other elements into the insulation(e.g. lamp, downpipe, shutters…).