Voorbeelden van het gebruik van Emitted light in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
No influence on emitted light.
The emitted light is detected by a CCD camera.
Heavily defective lens emitted light affected.
The emitted light is measured with a proprietary detector.
Where Efluor is the energy of the emitted light;
Mensen vertalen ook
The emitted light is detected with the use of a spectrometer or photodiodes.
Slightly defective lens no influence on emitted light.
The color of emitted light depends on the difference in the energy levels.
During the measurement, the gloss tester picks up the reflection of emitted light.
The emitted light is collected by a lens
A CCD camera, which is the most widely used device for detecting the emitted light.
Let the emitted light propagation in one direction,
The Color Rendering Index of the lamp is determined with the emitted light spectrum.
The emitted light from the stained heart is split between camera 1
We can specifically define the spectrum of the emitted light,” says Prof.
The different colors of the emitted light correlate with the orientation of the molecules.
a hanging in the air emitted light of the moon.
In most cases, the emitted light has longer wavelength than the source light. .
Ambient light sensor to automatically adjust the emitted light of the display.
The emitted light from the sample travels back through the objective lens,
round buildings that were domed and emitted light from every square inch of the structure.
temperature of energetic atoms in the plasma determines the wavelength and intensity of emitted light.
As a result of improvements in range of the emitted light is close to the spectrum of a lamp, which is essential to plants.
depending on the properties of the emitted light are distinguished.
In atomic emission spectroscopy, the intensity of the emitted light is directly proportional to the concentration of atoms.
As a result, different designs of drivers can lead to varied levels of unwanted effects in the emitted light of LEDs," says Perz.
This pulsation creates a brightness modulation in the emitted light which is why these lamps often have a rather high level of flicker at 100 Hz.
continuously adapts the color and brightness of the emitted light to match the image.
The system uses the depolarizing effect that is generated when the emitted light passes through the film to significantly improve detection reliability.
xenon) to the gas in the bubble increases the intensity of the emitted light.