Voorbeelden van het gebruik van Opamp in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
Description: quad bi-fet opamp.
Sound alarm based on LM741 opamp and LM386 amplifier.
This is a single 5V rail-to-rail OpAmp.
Description: quad opamp low power.
New clipper circuit diagram(based on TL071 opamp).
Description: bi-fet opamp low noise.
One single opamp can take over the job from the electrolytics.
Utilises a discrete 6-pin socketed 1731 style opamp.
At 200 kHz the opamp has an open loop bandwidth of 50 dB(x 316).
This is in turn inverted and substantially amplified by the opamp.
It basically exists of an opamp A and a feedback resistor R.
Tune up your own sound with ease- Swappable OPamp socket.
A generic cheap opamp will carry a large DC component at its output.
Voltage follower with 1G ohm input resistance based on LM11 opamp.
The two diodes protect the input of the opamp against excessive voltages.
The JRC NJM2120D replaces the no longer available M5201 opamp.
The symmetry around the opamp is disturbed
a symmetrical +/-12V is created for the opamp.
Therefore, for the I/V conversion often an opamp is used, whose inverting input forms a virtual ground point.
As the photodiode has a very small nano-ampere signal level, the device contains an opamp to amplify this signal.
This opamp can supply enough oputput current to feed an XO-module directly,
This way, the voltage present on the inverting input is influenced too much by the output voltage swing of the opamp.
The opamp measures the offset voltage at the output of the amplifier
necessary reference voltage and this is passively filtered with an R-C filter before it is fed to the opamp.
powersupply in digital and opamp circuits Large values in filters very useful,
an active regulating element like an opamp for example.
Since only one opamp needs to be powered,
The two output currents of this D/A-converter are passively converted to a voltage by means of two resistors and summed by an opamp in this case an AD8610A.
The amount of high frequency energy that enters the opamp can be attenuated by inserting an extra capacitor between the first 10k resistors after the DAC RD21/23 and RD22/24.
The OpAmp Muff pedal is a reissued model of the iconic pedal used by legendary band The Smashing Pumpkins,