Voorbeelden van het gebruik van Sensor signals in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
Logical AND connection of two digital sensor signals.
You will learn how sensor signals can be processed using electronic circuits.
Visualisation and assessment of current sensor signals.
The D-Air® control unit monitors the sensor signals 1000 times per second with a sophisticated tripping algorithm.
evaluation of current sensor signals.
This makes further adaptation to different sensor signals and application requirements possible.
A Y-splitter is a cost-efficient solution to combine two sensor signals.
Lasers were used for the measurement of sensor signals in the microfluidic system.
this PLC is responsible for the acquisition of photoelectric sensor signals.
Conversion and Separation of RTD and TC sensor signals to analogue signals. .
storage of(multiple) sensor signals.
Submersible used for converting sensor signals from Grundfos S pumps.
Sensor signals that occur in rapid succession are reliably processed by the control system
The PCE-RE62 is a universal controller for various sensor signals and control modes.
These are capable, on the basis of sensor signals in the Vitens Innovation Playground(VIP),
students could test all sensor signals simultaneously.
The D-Air® control unit monitors the sensor signals 1000 times per second with an advanced shutdown algorithm.
The rotational speed of the delivery pumps is monitored by reading out discrete sensor signals using a frequency converter.
A data-driven tool which, on the basis of sensor signals from the distribution network, detects prospective anomalies that can lead to failures.
This allows further adaptation of the displayed values to different sensor signals and application requirements.
In the aeration tank, sensor signals with parameters relevant to the microorganisms are sent to the control panel by transmitter power supplies and signal converters.
IO 111 Signal converter module used for converting sensor signals from Grundfos S pumps.
Sensor signals are collected
Splitter boxes are used where several sensor signals are collected to forward them via a common cable.
lowers the error rate while reliably transmitting sensor signals to the control panel.
for converting sensor signals or electrical measurements into analogue electrical signals which are compatible with control system equipment.
An example of applying new measuring methods is identifying substance concentrations in drinking water by interpreting sensor signals by means of an artificial neural network algorithm.
The sensor signals are returned to an input
sending sensor signals, and communicating operational information.
Sensor signal distance: The normal distance is 3-5 meters(10-16 ft).