Voorbeelden van het gebruik van The firmware update in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
The firmware update was successful.
This completes the firmware update.
The firmware update was successful Troubleshooting.
Tap for more details about the firmware update.
During the firmware update, you should not.
Mensen vertalen ook
Stop any recording before you start with the firmware update.
The firmware update may not work properly de-.
Stop any recording before you start with the firmware update.
Carry out the firmware update and you also have AF.
Do not operate the laser machine during the firmware update.
The firmware update will take about 15 seconds.
LED blinking indicates that the firmware update is installing.
The firmware update process may take up to 10 minutes.
If the version number is 19226R, the firmware update was successful.
The firmware update was successful Troubleshooting.
If the LEDs start blinking, the firmware update is launched.
Perform the firmware update again from the beginning.
If the version number displayed is 14, the firmware update was successful.
The firmware update continues to fail after multiple tries.
If the current firmware version is 1.12, the firmware update was successful.
Please Note:- The firmware update must run exclusively on your PC.
If the version number is PKG4.131AAL, the firmware update was successful.
The firmware update version 1.1 for E-M1 Mark II is now available.
He wrote an executable into the firmware update that identified the sender.
The firmware update starts and the following screen appears.
Recommended operating system for the computer that will download the firmware update.
Please perform the firmware update via the Wi-Fi network.
For this, were used same cryptographic functions that as for the firmware update process.
When the firmware update hangs on rebooting then please follow these steps.
configure the access restrictions again after the firmware update.