Примеры использования Electromagnetic valve на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Japan Import motord and Electromagnetic valve.
Relay and electromagnetic valve surge absorption.
Cause: Fault in the circuit board,control panel or electromagnetic valve.
Remove the electromagnetic valve and clean it.
PCB depaneling control method is by pneumatic-driven and electromagnetic valve.
Relay and electromagnetic valve surge absorption.
Banging noise from the water pipes when the electromagnetic valve opens or closes.
Relay and electromagnetic valve surge absorption.
It includes: a fuel cell stack, fans,an IC board and an electromagnetic valve.
Action: Remove the electromagnetic valve and clean it.
Electromagnetic valve and cylinder with the German and Taiwan products.
It includes a fuel cell stack, fans,an IC board and an electromagnetic valve.
Electromagnetic valve break down Repair or change electromagnetic valve. .
Automatic burner ignition by means of an electromagnetic valve, with pilot light and thermocouple.
The electromagnetic valve for draining the steam generator's size tank is fitted into the draining pipe.
Tank heater with 12 sections,both reactors' valves, both reactors' electromagnetic valves.
Cause: The electromagnetic valve for the incoming water is stuck.
In contrast to the"on the wall" models, they have a separate tap with electromagnetic valve and three pre-cleaning filters.
The electromagnetic valve opens/closes according to PID algorithm, so that it is being filled around with oil or cancelling solution.
Missing a process from selection discovered electromagnetic valve varsts and the valve was opened during pouring the oil into it.
Electromagnetic valves- are the device that uses the electromechanical principle of operation to regulate(to open and to close) the flow of operating medium.
If water still flows from the steam nozzles 10 minutes after the power has been switched off from the control panel, there is dirt in the electromagnetic valve.
Air source control adopts MAC high-frequency electromagnetic valve imported from the United States, with high frequency and working life up to 200 million times;
The EOS1000 fuel cell system is a highly integrated system with a compact design which includes a fuel cell stack, fans,an IC board and an electromagnetic valve.
All electromagnetic valves, level sensors, pressure sensors, conveyer movement sensors and valve end-switches are connected to input/output modules, that ensure information exchange with the main controller via AS interface.
For automatic control it is necessary the use of control board, flow sensors, water pressure andsoil moisture sensors, electromagnetic valves, programmable timers, weather controllers, and other high-precision equipment, additional facilities, lines of communication and power supply.
The electromagnetic hydraulic valve is SUNNY brand from USA, stable operation.
If the fault remains, remove the automatic electromagnetic flushing valve and clean it.
Gas train complete with security valve and electromagnetic actuator, minimum pressure switch, pressure regulator and gas filter.
Electromagnetic and pneumatic camless valve actuators offer the greatest control of precise valve timing, but, in 2016, are not cost effective for production vehicles.