Примеры использования Fan blades на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Below we have the three plastic fan blades.
The fan blades are well-balanced, heavy gauge aluminum.
Injury may result due to contact with the air conditioner's highspeed fan blades.
Make sure that the fan blades rest on the pin on the motor.
Fan blades shall be open cavity with suitable drainage to avoid accumulation of moisture.
When the screens are plugged and the fan blades are dirty, air is not allowed through.
The fan blades on the EVGA ACX Cooler are 700% stronger and weigh 25% less than standard versions.
The major function of fan bearing is to make fan blades operated fluently.
The fan blades are made of„BLACK GRIVORY HT2V-SH” plastic, which made it possible to reduce the mass of the device.
Product damage or personal injury may result due to contact with the air conditioner's high-speed fan blades.
Even the fan blades are of the highest quality; with a 700% increase in strength, and 25% lower weight when compared to competitors.
Issue: Dirt build-up on the drive anddriver sheaves, or main motor fan blades, can cause vibration.
Be careful not to touch the fan blades during the removal process to avoid unbalancing the fans. .
Product malfunctioning, product or injury damage may result due to contact with the air conditioner's high-speed fan blades.
The fan blades are made of durable"Nylon 6" plastic which is capable of withstanding not only mechanical loads, but also elevated temperature.
Each room has an ensuite bathroom with shower, toiletries,mosquito nets for windows, ceiling fan blades.
The GEnx uses some technology from the GE90 turbofan,including composite fan blades, and the smaller core featured in earlier variants of the engine.
STEP 5- Lift cardboard cover above fan at plastic plugs andcarefully clean condenser coil and fan blades.
Higher static pressure andreduced noise The use of multiple, overlapping arc shaped fan blades makes it possible to optimize the chord lenght and blade outlet angle.
STEP 5- Lift cardboard cover above fan at plastic plugs andcarefully clean condenser coil and fan blades.
Cement: Cement furnace components,sinter plant parts, fan blades, mixer blades, crews, gyratory mantles, coal and cement pulverizer rolls, raw material crushing components, molding panels.
The inside of the cooler drum should be cleaned at least once a week, as should the fan blades of the fan impeller.
EVGA also spent time to ensure that even the fan blades were of the highest quality; with a 700% increase in strength, and 25% lower weight when compared to competitors dual fan designs.
Finish your cleaning sweep by attaching the dusting brush to an extended hose to reach ceiling fan blades and cornice boards, walls and high ceilings.
With the help of the nozzles pointing to the sides and downwards, the washing unit automatically draws itself upwards andcleans the waste air shaft and fan blades intensively as it moves.
Ensure that a protective guard is installed on air suction and air outlet side to prevent that the fan blades or heat exchanger be touched.
Metal Drum Cage with 14" Aluminium Fan Blade.
Fan Blade cleaning(See instructions for fan head assembly) 1.
Check the fan, blade coupling and fan housing regularly for wear and a tight fit.
Original, replacement andaftermarket Hamm 2233444KZ engine fan blade.