Примеры использования Heat pump convector на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Only for heat pump convector.
Heat pump convectors- Multiple rooms Setup.
Under floor heating+ Heat pump convectors Setup b.
The heat pump convectors The shut-off valve.
The under floor heating The heat pump convectors.
The heat pump convector also has a very low noise level.
Combination: Under floor heating+ Heat pump convectors.
Compared with heat pump convectors for one room.
You can choose between under floor heating, low temperature radiators, a heat pump convector or regular fan coil units.
The heat pump convectors are directly connected to the indoor unit.
Bed rooms(additional zone) Heat pump convectors.
The heat pump convector is much more than a fan coil unit or any other heat emitter.
Combination: Under floor heating+ Heat pump convectors Setup b.
The heat pump convector is therefore the ideal heat emitter for apartment applications, providing high comfort levels.
Combination: Under floor heating+ Heat pump convectors Space heating is provided by.
Heat pump convector(FWXV) For providing space heating, it is possible to use heat pump convectors FWXV.
The space operation mode is sent to the heat pump convectors by one digital output on the indoor unit X2M/32 and X2M/33.
To increase comfort and performance,Daikin recommends to install the valve kit option EKVKHPC on each heat pump convector.
A Remote controller of the heat pump convectors b User interface c Mixing valve station d Pressure regulating valve.
On/OFF thermostat(wired) On/OFF thermostat(wireless)External thermistor on On/OFF thermostat(wireless) Heat pump convector 14 Technical data.
The heat pump convector is able to emit the required levels of heat at low leaving water temperatures, while retaining a modest size.
For installation instructions, refer to the installation manual of the heat pump convectors, and the addendum book for optional equipment.
Each Daikin heat pump convector has its own control and every room can be independently heated(or cooled) as required.
On/OFF thermostat(wired) On/OFF thermostat(wireless)External thermistor on On/OFF thermostat(wireless) Heat pump convector Additional leaving water temperature.
For each room with heat pump convectors: The desired room temperature is set via the remote controller of the heat pump convectors. .
External room thermostat for the additional zone::[A.2.2.5] Code:[C-06] 1(Thermo ON/OFF):When the used external room thermostat or heat pump convector can only send a thermo ON/OFF condition.
The heat pump convector improves efficiency by approximately 25% compared to a heating system that combines under floor heating and regular fan coil units.
Instead of the leaving water circuit being switched on andoff via a thermostat in a single master room, each heat pump convector can be directly wired to the Daikin Altherma indoor unit, the system's intelligence centre.
The heat pump convector saves on running costs thanks to the improved efficiency by approximately 25% compared to a heating system that combines under- floor heating and regular fan coil units.
User interface 2(e) Optional equipment 11 Power supply for bottom plate heater 2(b) 12 Room thermostat 3 or 4 100 mA(b) 13 Outdoor ambient temperature sensor 2(b)14 Indoor ambient temperature sensor 2(b) 15 Heat pump convector 4 100 mAb.