Примеры использования Insulation material на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Insulation material/ method.
Processing Insulation Material.
Insulation material selection.
EPE foam+ foil alumium as interior insulation material;
Insulation material/ method.
The house has waterproof structure and heating insulation material.
Piping insulation material main unit.
Burrs and wild shrubs can also serve as an insulation material.
Piping insulation material(main unit) 5.
It guarantees that the wire will be perfectly centered within the insulation material.
Insulation material Rigid expanded polyurethane.
You can not mount panel with insulation material in order to avoid lightning strike.
Insulation material in the construction industry.
It's mainly used for testing thin-layer insulation material electric strength.
Cable insulation material or cable cross-section.
For use under high humidity, strengthen the insulation material for refrigerant piping.
The insulation material shall be resistant to fire and flame spread.
For the insulation to be more effective, the insulation material should be as dry as possible.
Insulation material can be thinner than conductive materials. .
Insulate the indoor drain pipe with 10mm or more of insulation material to prevent condensation.
The gases in the insulation material require special disposal procedures.
Refrigerant piping insulation Use polyethylene foam as insulation material.
The insulation material and the coolant tubes expand and then bend again;
For use under high humidity, strengthen the insulation material for refrigerant piping.
The gases in insulation material require special disposal procedure.
For this purpose, tiny bits of stone androck- sand- is a viable alternative insulation material.
Its insulation material makes the unit very lightweight and especially energy efficient Eco Design A.
The vessel is operated during winter time manufactured housing insulation insulation material.
For gas piping, use insulation material of which heat resistant temperature is not less than 120 C.
Maintain a sufficiently large distance to soft materials such as rubber hoses or insulation material.