Примеры использования Pressure transmitter на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Pressure Transmitter Calibration.
Other Pressure transmitters for liquids.
It can also result in damage to the pressure transmitter.
Electronic pressure transmitter nonsubmersible.
Full electronic HIPPS- with electronic pressure transmitters.
Pressure Transmitter with Diaphragm Seal PAS-… N.
Figure 4-1 Mounting the pressure transmitter, dimensions in mm 1.
The pressure transmitter must be mounted below the measuring point.
From basic, ultra-compact to modular,extensible pressure transmitters.
The pressure transmitter must be mounted above the measuring point.
To prevent measuring errors,fasten the pressure transmitter for moved process media.
The pressure transmitter should be mounted below the lowest level.
The system includes 48 Aplisens smart pressure transmitters, HART multiplexer and PC with software.
The pressure transmitter operates on the piezoresistive measuring principle.
PA-Out(value after passing the function block):PA output A pressure transmitter delivers the following measured values.
Submersible pressure transmitters are frequently used for level measurements.
This feature consists of a piston stopper in the gas side of the cylinder and a pressure transmitter for pre-charge pressure. .
For instance, pressure transmitters also provide temperature values.
For applications with sudden pressure and temperature changes(up to +400 C/ +842 F)or vibration, the pressure transmitter can be combined with one or two capillary diaphragm seals.
The pressure transmitter is compensated for a wide temperature range.
In the version“with Ex protection Ex II 1/2G Ex ia IIC T6 Ga/Gb“, the pressure transmitter canbe mounted within the hazardous Zone 1, for connection to Zone 0.
The pressure transmitter comes with various diagnostics and digital communication options.
Four bilge mounted pressure transmitters supply all required data.
The pressure transmitter measures the liquid levels in tanks, containers, channels and dams.
In 1987, Nuova Fima manufactured the first electronic pressure transmitter and thereby entered the era of electronics and automation, which also entered its plants on a major scale.
The pressure transmitter is available for various measuring ranges and optionally with explosion protection.
Application range The pressure transmitter LH100 is a submersible sensor for hydrostatic level measurement.
The pressure transmitter was calibrated to the measuring range at the manufacturer and cannot be re-calibrated.
The PFT electronic pressure transmitter is used for the precision measurement of pressures in liquids and gases.