Примеры использования Raid mode на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
RAID mode Minimum hard drives.
Viewing the Current RAID Mode.
RAID Mode Maximum Spare Drives.
Set the RAID mode to RAID. .
Use this button to change RAID modes.
Switching RAID mode to NOR mode. .
RAID mode Single-disk or double-disk security Examples.
Set the RAID switch andselect your preferred RAID mode.
Click Change RAID Mode at the bottom of the screen.
Each level of RAID has its own advantages,as described in RAID Modes.
Changing the RAID mode requires formatting the drives.
Please format the hard drive after your initial installation or change of RAID mode.
It is the most complex raid mode, it is only available in 20-man format.
Before connecting the device, install the hard drives andset your preferred RAID mode.
It is the most complex raid mode, it is only available in 20-man format.
It is an MMO game,set on a post-apocalyptic world where you will have to fight for your survival on PvP arenas in Raid mode.
The RAID mode should be set after installing and before formatting the drives.
Use the following steps to change the current RAID mode on your My Cloud EX2 Ultra device.
After changing the RAID mode, press the button above the RAID switch to confirm the new setting.
The BIOS must have the drive set to RAID mode, and up to 64GB of mSATA storage can be allocated for caching.
In Raid Mode you will take on hordes of enemies, and you can play solo or co-op with a friend online.
The raid mode, you can not use the prepared deck, and its constituent before the game of the accident of the proposed maps.
In this home console version of the game, Raid Mode offers some exclusive enemies, brand new weapons, new skill sets, and Hunk and Rachel as playable characters too!
Switch to the RAID mode as you wish, power on the product and complete the setting inside Disk management of your system.
Set your preferred RAID mode and confirm it by pushing the button above the RAID switch.
Most RAID modes use equal disk capacities among the pool of hard drives to protect data.
Intel recommends choosing RAID mode on their motherboards(which also enables AHCI) rather than AHCI/SATA mode for maximum flexibility.
Press the“Confirm RAID mode” button and then make sure the computer has recognized your hard drive and you can access the data.
If only one drive is defective and the RAID mode is set to RAID 1, the data can still be accessed but we strongly recommend replacing the faulty drive immediately to assure continued proper backup and data safety.