Примеры использования Self test на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Self test error.
RLB_202 Self tests.
Self test" means.
RLB_102 Self tests.
To run the mobile device client self test. .
RLB_302 Self tests.
The yield on a PC RS-232 work with the software"Self Test.
Interconnect System Self Test Feature follow the on-screen prompts.
Sensor fault 10 Built-in and self tests.
After the self test, during which all display elements are displayed, measurement begins.
Built-in and self tests.
If you want to get clarity about it, whether you are possibly at risk,take a self test.
Once activated the self test software will continuously execute the following procedure.
If your browser doesn't automatically perform the self test, click here.”.
It has a built-in communications, self test, watch dog timer, protection against halting or hang-up.
TSt” appears in the display while in the self test program.
The Self Test URL is installed with the mobile device client during client installation.
RLB_203 Upon detection of an internal fault during self test, the SEF shall.
Activate the self test program by pressing the Power Button while turning on the AC power.
Power on the computer and the system will start the Power On Self Test(POST) process.
If the browser does not perform the self test, click the link to perform the self test.
A web browser window will open stating,“Performing Device Management Self Test in 5 Seconds.
Self test function The PaperSchmidt performs a number of self checks and gives an alert when there is a problem.
The Marine Climate System software provides a self test program to facilitate factory testing of the entire air conditioning system.
The self test program will continue until the power is interrupted or the test is halted by pressing the Power Button once.
Each time the computer is turned on, it performs a Power-On Self Test(POST), and the operating system(such as Windows) should load.
Communications Self Test tests the communication between the user interface and the main control functions of the device.
When the thermometer is used for the fi rst time and each time the batteries are changed, the date andtime are displayed(after the self test) in the basic setting.
While the initial start-up self test and plausibility checks are completed, not to exceed 2 minutes when driven under the conditions of paragraph 5.10.2.;
The control device shall self-detect faults through self tests and built-in-tests, according to the following table: Sub-assembly to test. .